130 lines
5.0 KiB
Markdown
130 lines
5.0 KiB
Markdown
:information_source:️ Since 2024, [GC2](https://github.com/GrazerComputerClub) has taken over maintenance of the project, supporting new OS versions as well as current hardware generations. We are dedicated to keeping the arguably best-performing GPIO Library for Raspberry Pi running smoothly. We strive to do our best, but please note that this is a community effort, and we cannot provide any guarantees or take responsibility for implementing specific features you may need.
|
||
|
||
:warning:️ :construction: on Pi5, PWM support is currently under development and _will not work at this point_. If you're interested in the progress, please check the [corresponding issue](https://github.com/GrazerComputerClub/WiringPi/issues/21).
|
||
|
||
# WiringPi
|
||
|
||
WiringPi is a _performant_ GPIO access library written in C for Raspberry Pi boards.
|
||
|
||
To compile programs with wiringPi, you need to include `wiringPi.h` as well as link against `wiringPi`:
|
||
|
||
```c
|
||
#include <wiringPi.h> // Include WiringPi library!
|
||
|
||
int main(void)
|
||
{
|
||
wiringPiSetupGpio();
|
||
...
|
||
}
|
||
```
|
||
|
||
```sh
|
||
gcc -o myapp myapp.c -l wiringPi
|
||
```
|
||
|
||
Be sure to check out the [examples](./examples/), build them using Make:
|
||
|
||
```sh
|
||
cd examples
|
||
make <example-name | really-all>
|
||
```
|
||
|
||
The tool `gpio` can be used to set single pins as well as get the state of everything at once:
|
||
|
||
```
|
||
pi@wiringdemo:~ $ gpio readall
|
||
+-----+-----+---------+------+---+---Pi 3B--+---+------+---------+-----+-----+
|
||
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
|
||
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
|
||
| | | 3.3v | | | 1 || 2 | | | 5v | | |
|
||
| 2 | 8 | SDA.1 | IN | 1 | 3 || 4 | | | 5v | | |
|
||
| 3 | 9 | SCL.1 | IN | 1 | 5 || 6 | | | 0v | | |
|
||
| 4 | 7 | GPIO. 7 | IN | 0 | 7 || 8 | 0 | IN | TxD | 15 | 14 |
|
||
| | | 0v | | | 9 || 10 | 1 | IN | RxD | 16 | 15 |
|
||
| 17 | 0 | GPIO. 0 | IN | 1 | 11 || 12 | 1 | IN | GPIO. 1 | 1 | 18 |
|
||
| 27 | 2 | GPIO. 2 | IN | 1 | 13 || 14 | | | 0v | | |
|
||
| 22 | 3 | GPIO. 3 | IN | 1 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 |
|
||
| | | 3.3v | | | 17 || 18 | 1 | IN | GPIO. 5 | 5 | 24 |
|
||
| 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | |
|
||
| 9 | 13 | MISO | IN | 0 | 21 || 22 | 1 | IN | GPIO. 6 | 6 | 25 |
|
||
| 11 | 14 | SCLK | IN | 0 | 23 || 24 | 1 | IN | CE0 | 10 | 8 |
|
||
| | | 0v | | | 25 || 26 | 0 | IN | CE1 | 11 | 7 |
|
||
| 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 |
|
||
| 5 | 21 | GPIO.21 | IN | 0 | 29 || 30 | | | 0v | | |
|
||
| 6 | 22 | GPIO.22 | IN | 0 | 31 || 32 | 1 | IN | GPIO.26 | 26 | 12 |
|
||
| 13 | 23 | GPIO.23 | IN | 1 | 33 || 34 | | | 0v | | |
|
||
| 19 | 24 | GPIO.24 | IN | 1 | 35 || 36 | 1 | IN | GPIO.27 | 27 | 16 |
|
||
| 26 | 25 | GPIO.25 | IN | 1 | 37 || 38 | 1 | IN | GPIO.28 | 28 | 20 |
|
||
| | | 0v | | | 39 || 40 | 1 | IN | GPIO.29 | 29 | 21 |
|
||
+-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
|
||
| BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM |
|
||
+-----+-----+---------+------+---+---Pi 3B--+---+------+---------+-----+-----+
|
||
```
|
||
|
||
|
||
## Installing
|
||
|
||
You can either build it yourself or use the prebuilt binaries:
|
||
|
||
### Prebuilt Binaries
|
||
|
||
Grab the latest release from [here](https://github.com/WiringPi/WiringPi/releases).
|
||
|
||
|
||
Unzip/use the portable prebuilt verison:
|
||
|
||
```sh
|
||
# unzip the archive
|
||
tar -xfv wiringpi_<version>.tar.gz
|
||
```
|
||
|
||
Install the dpkg package:
|
||
|
||
```sh
|
||
# install a dpkg
|
||
sudo dpkg -i <wiringpi_<version>.dpkg
|
||
```
|
||
|
||
### From Source
|
||
|
||
```sh
|
||
sudo apt-get install git git-core
|
||
|
||
git clone https://github.com/wiringpi/wiringpi
|
||
cd wiringPi
|
||
./build
|
||
```
|
||
|
||
|
||
## Ports
|
||
|
||
wiringPi has been wrapped for multiple languages:
|
||
|
||
* Node - https://github.com/WiringPi/WiringPi-Node
|
||
* Perl - https://github.com/WiringPi/WiringPi-Perl
|
||
* PHP - https://github.com/WiringPi/WiringPi-PHP
|
||
* Python - https://github.com/WiringPi/WiringPi-Python
|
||
* Ruby - https://github.com/WiringPi/WiringPi-Ruby
|
||
|
||
## Support
|
||
|
||
Please use the [issue system](https://github.com/WiringPi/WiringPi/issues) of GitHub.
|
||
|
||
Please do not email Gordon or @Gadgetoid.
|
||
|
||
Please don't email GC2 for reporting issues, you might [contact us](mailto:wiringpi@gc2.at) for anything that's not meant for the public.
|
||
|
||
## History
|
||
|
||
This repository is the continuation of 'Gordon's wiringPi' which has been [deprecated](https://web.archive.org/web/20220405225008/http://wiringpi.com/wiringpi-deprecated/), a while ago.
|
||
|
||
* The last "old wiringPi" source of Gordon's release can be found at the
|
||
[`final_source_2.50`](https://github.com/WiringPi/WiringPi/tree/final_official_2.50) tag.
|
||
* The default `master` branch contains code that has been written since version 2.5
|
||
to provide support for newer hardware as well as new features.
|
||
|
||
## Debug
|
||
|
||
WIRINGPI_DEBUG=1 ./my_wiringpi_program
|
||
WIRINGPI_DEBUG=1 ./gpio readall
|