maxim/gpio-reader
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
b243be74d4381fea3e807be8b99c894958e8ddd9
gpio-reader/wiringPi/wiringPi.c
Connor Gibson b243be74d4 Swap out-of-order arguments to calloc
2025-06-07 15:30:47 -07:00

3734 lines
112 KiB
C
Raw Blame History

/*
* wiringPi:
* Arduino look-a-like Wiring library for the Raspberry Pi
* Copyright (c) 2012-2025 Gordon Henderson and contributors
* Additional code for pwmSetClock by Chris Hall <chris@kchall.plus.com>
*
* Thanks to code samples from Gert Jan van Loo and the
* BCM2835 ARM Peripherals manual, however it's missing
* the clock section /grr/mutter/
***********************************************************************
* This file is part of wiringPi:
* https://github.com/WiringPi/WiringPi
*
* wiringPi is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation, either version 3 of the
* License, or (at your option) any later version.
*
* wiringPi is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with wiringPi.
* If not, see <http://www.gnu.org/licenses/>.
***********************************************************************
*/
// Revisions:
// 19 Jul 2012:
// Moved to the LGPL
// Added an abstraction layer to the main routines to save a tiny
// bit of run-time and make the clode a little cleaner (if a little
// larger)
// Added waitForInterrupt code
// Added piHiPri code
//
// 9 Jul 2012:
// Added in support to use the /sys/class/gpio interface.
// 2 Jul 2012:
// Fixed a few more bugs to do with range-checking when in GPIO mode.
// 11 Jun 2012:
// Fixed some typos.
// Added c++ support for the .h file
// Added a new function to allow for using my "pin" numbers, or native
// GPIO pin numbers.
// Removed my busy-loop delay and replaced it with a call to delayMicroseconds
//
// 02 May 2012:
// Added in the 2 UART pins
// Change maxPins to numPins to more accurately reflect purpose
#include <stdio.h>
#include <stdarg.h>
#include <stdint.h>
#include <stdlib.h>
#include <stdbool.h>
#include <ctype.h>
#include <poll.h>
#include <unistd.h>
#include <errno.h>
#include <string.h>
#include <time.h>
#include <fcntl.h>
#include <pthread.h>
#include <sys/time.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#include <asm/ioctl.h>
#include <byteswap.h>
#include <sys/utsname.h>
#include <linux/gpio.h>
#include <dirent.h>
#include <inttypes.h>
#include "softPwm.h"
#include "softTone.h"
#include "wiringPi.h"
#include "../version.h"
#include "wiringPiLegacy.h"
// Environment Variables
#define ENV_DEBUG "WIRINGPI_DEBUG"
#define ENV_CODES "WIRINGPI_CODES"
#define ENV_GPIOMEM "WIRINGPI_GPIOMEM"
// Extend wiringPi with other pin-based devices and keep track of
// them in this structure
struct wiringPiNodeStruct *wiringPiNodes = NULL ;
// BCM Magic
#define BCM_PASSWORD 0x5A000000
// The BCM2835 has 54 GPIO pins.
// BCM2835 data sheet, Page 90 onwards.
// There are 6 control registers, each control the functions of a block
// of 10 pins.
// Each control register has 10 sets of 3 bits per GPIO pin - the ALT values
//
// 000 = GPIO Pin X is an input
// 001 = GPIO Pin X is an output
// 100 = GPIO Pin X takes alternate function 0
// 101 = GPIO Pin X takes alternate function 1
// 110 = GPIO Pin X takes alternate function 2
// 111 = GPIO Pin X takes alternate function 3
// 011 = GPIO Pin X takes alternate function 4
// 010 = GPIO Pin X takes alternate function 5
//
// So the 3 bits for port X are:
// X / 10 + ((X % 10) * 3)
// Port function select bits
#define FSEL_INPT 0b000 //0
#define FSEL_OUTP 0b001 //1
#define FSEL_ALT0 0b100 //4
#define FSEL_ALT1 0b101 //5
#define FSEL_ALT2 0b110 //6
#define FSEL_ALT3 0b111 //7
#define FSEL_ALT4 0b011 //3
#define FSEL_ALT5 0b010 //2
//RP1 defines
#define FSEL_ALT6 8
#define FSEL_ALT7 9
#define FSEL_ALT8 10
#define FSEL_ALT9 11
//RP1 chip (@Pi5) - 3.1.1. Function select
#define RP1_FSEL_ALT0 0x00
#define RP1_FSEL_GPIO 0x05 //SYS_RIO
#define RP1_FSEL_NONE 0x09
#define RP1_FSEL_NONE_HW 0x1f //default, mask
// maybe faster then piRP1Model
#define ISRP1MODEL (PI_MODEL_5==RaspberryPiModel || PI_MODEL_CM5==RaspberryPiModel|| PI_MODEL_500==RaspberryPiModel || PI_MODEL_CM5L==RaspberryPiModel)
//RP1 chip (@Pi5) RIO address
const unsigned int RP1_RIO_OUT = 0x0000;
const unsigned int RP1_RIO_OE = (0x0004/4);
const unsigned int RP1_RIO_IN = (0x0008/4);
//RP1 chip (@Pi5) RIO offset for set/clear value
const unsigned int RP1_SET_OFFSET = (0x2000/4);
const unsigned int RP1_CLR_OFFSET = (0x3000/4);
//RP1 chip (@Pi5) PDE/PDU pull-up/-down enable
const unsigned int RP1_PUD_UP = (1<<3);
const unsigned int RP1_PUD_DOWN = (1<<2);
const unsigned int RP1_INV_PUD_MASK = ~(RP1_PUD_UP | RP1_PUD_DOWN); //~0x0C
//RP1 chip (@Pi5) pin level, status register
const unsigned int RP1_STATUS_LEVEL_LOW = 0x00400000;
const unsigned int RP1_STATUS_LEVEL_HIGH = 0x00800000;
const unsigned int RP1_STATUS_LEVEL_MASK = 0x00C00000;
const unsigned int RP1_DEBOUNCE_DEFAULT_VALUE = 4;
const unsigned int RP1_DEBOUNCE_MASK = 0x7f;
const unsigned int RP1_DEBOUNCE_DEFAULT = (RP1_DEBOUNCE_DEFAULT_VALUE << 5);
const unsigned int RP1_IRQRESET = 0x10000000; //CTRL Bit 28
const unsigned int RP1_PAD_DEFAULT_0TO8 = (0x0B | 0x70); //Slewfast, Schmitt, PullUp, | 12mA, Input enable
const unsigned int RP1_PAD_DEFAULT_FROM9 = (0x07 | 0x70); //Slewfast, Schmitt, PullDown, | 12mA, Input enable
const unsigned int RP1_PAD_IC_DEFAULT_0TO8 = 0x9A; //pull-up, Schmitt
const unsigned int RP1_PAD_IC_DEFAULT_FROM9 = 0x96; //pull-down, Schmitt
const unsigned int RP1_PAD_DRIVE_MASK = 0x00000030;
const unsigned int RP1_INV_PAD_DRIVE_MASK = ~(RP1_PAD_DRIVE_MASK);
const unsigned int RP1_PWM0_GLOBAL_CTRL = 0;
const unsigned int RP1_PWM0_FIFO_CTRL = 1;
const unsigned int RP1_PWM0_COMMON_RANGE= 2;
const unsigned int RP1_PWM0_COMMON_DUTY = 3;
const unsigned int RP1_PWM0_DUTY_FIFO = 4;
const unsigned int RP1_PWM0_CHAN_START = 5;
//offset channel
const unsigned int RP1_PWM0_CHAN_CTRL = 0;
const unsigned int RP1_PWM0_CHAN_RANGE = 1;
const unsigned int RP1_PWM0_CHAN_PHASE = 2;
const unsigned int RP1_PWM0_CHAN_DUTY = 3;
const unsigned int RP1_PWM0_CHAN_OFFSET= 4;
const unsigned int RP1_PWM0_CHAN0_RANGE = RP1_PWM0_CHAN_START+RP1_PWM0_CHAN_OFFSET*0+RP1_PWM0_CHAN_RANGE;
const unsigned int RP1_PWM0_CHAN1_RANGE = RP1_PWM0_CHAN_START+RP1_PWM0_CHAN_OFFSET*1+RP1_PWM0_CHAN_RANGE;
const unsigned int RP1_PWM0_CHAN2_RANGE = RP1_PWM0_CHAN_START+RP1_PWM0_CHAN_OFFSET*2+RP1_PWM0_CHAN_RANGE;
const unsigned int RP1_PWM0_CHAN3_RANGE = RP1_PWM0_CHAN_START+RP1_PWM0_CHAN_OFFSET*3+RP1_PWM0_CHAN_RANGE;
const unsigned int RP1_PWM_CTRL_SETUPDATE = 0x80000000; // Bit 32
const unsigned int RP1_PWM_TRAIL_EDGE_MS = 0x1;
const unsigned int RP1_PWM_FIFO_POP_MASK = 0x100; // Bit 8
const unsigned int RP1_CLK_PWM0_CTRL_DISABLE_MAGIC = 0x10000000; // Default after boot
const unsigned int RP1_CLK_PWM0_CTRL_ENABLE_MAGIC = 0x11000840; // Reverse engineered, because of missing documentation, don't known meaning of of bits
const unsigned int CLK_PWM0_CTRL = (0x00074/4);
const unsigned int CLK_PWM0_DIV_INT = (0x00078/4);
const unsigned int CLK_PWM0_DIV_FRAC = (0x0007C/4);
const unsigned int CLK_PWM0_SEL = (0x00080/4);
//RP1 chip (@Pi5) address
const unsigned long long RP1_64_BASE_Addr = 0x1f000d0000;
const unsigned int RP1_BASE_Addr = 0x40000000;
const unsigned int RP1_CLOCK_Addr = 0x40018000; // Adress is not mapped to gpiomem device, lower than RP1_IO0_Addr
const unsigned int RP1_PWM0_Addr = 0x40098000; // Adress is not mapped to gpiomem device, lower than RP1_IO0_Addr
const unsigned int RP1_IO0_Addr = 0x400d0000;
const unsigned int RP1_SYS_RIO0_Addr = 0x400e0000;
const unsigned int RP1_PADS0_Addr = 0x400f0000;
// Access from ARM Running Linux
// Taken from Gert/Doms code. Some of this is not in the manual
// that I can find )-:
//
// Updates in September 2015 - all now static variables (and apologies for the caps)
// due to the Pi v2, v3, etc. and the new /dev/gpiomem interface
const char* gpiomem_global = "/dev/mem";
const char* gpiomem_BCM = "/dev/gpiomem";
const char* gpiomem_RP1 = "/dev/gpiomem0";
const int gpiomem_RP1_Size = 0x00030000;
// PCIe memory access, need to detect path / PCIe address
//dmesg: rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
const char* pcie_path = "/sys/bus/pci/devices";
//const char* pciemem_RP1_path = "/sys/bus/pci/devices/0000:01:00.0";
//const char* pciemem_RP1 = "/sys/bus/pci/devices/0000:01:00.0/resource1";
char pciemem_RP1[512] = { '\0' };
const char* pciemem_RP1_bar = "resource1";
const int pciemem_RP1_Size = 0x00400000;
//const unsigned short pciemem_RP1_Ventor= 0x1de4;
//const unsigned short pciemem_RP1_Device= 0x0001;
const char* pciemem_RP1_Ventor= "0x1de4";
const char* pciemem_RP1_Device= "0x0001";
static volatile unsigned int GPIO_PADS ;
static volatile unsigned int GPIO_CLOCK_ADR ;
static volatile unsigned int GPIO_BASE ;
static volatile unsigned int GPIO_TIMER ;
static volatile unsigned int GPIO_PWM ;
static volatile unsigned int GPIO_RIO ;
#define PAGE_SIZE (4*1024)
#define BLOCK_SIZE (4*1024)
static unsigned int usingGpioMem = FALSE ;
static int wiringPiSetuped = FALSE ;
// PWM
// Word offsets into the PWM control region
#define PWM_CONTROL 0
#define PWM_STATUS 1
#define PWM0_RANGE 4
#define PWM0_DATA 5
#define PWM1_RANGE 8
#define PWM1_DATA 9
// Clock regsiter offsets
#define PWMCLK_CNTL 40
#define PWMCLK_DIV 41
#define PWM0_MS_MODE 0x0080 // Run in MS mode
#define PWM0_USEFIFO 0x0020 // Data from FIFO
#define PWM0_REVPOLAR 0x0010 // Reverse polarity
#define PWM0_OFFSTATE 0x0008 // Ouput Off state
#define PWM0_REPEATFF 0x0004 // Repeat last value if FIFO empty
#define PWM0_SERIAL 0x0002 // Run in serial mode
#define PWM0_ENABLE 0x0001 // Channel Enable
#define PWM1_MS_MODE 0x8000 // Run in MS mode
#define PWM1_USEFIFO 0x2000 // Data from FIFO
#define PWM1_REVPOLAR 0x1000 // Reverse polarity
#define PWM1_OFFSTATE 0x0800 // Ouput Off state
#define PWM1_REPEATFF 0x0400 // Repeat last value if FIFO empty
#define PWM1_SERIAL 0x0200 // Run in serial mode
#define PWM1_ENABLE 0x0100 // Channel Enable
const int PWMCLK_DIVI_MAX = 0xFFF; // 3 Byte max size for Clock devider
const int OSC_FREQ_DEFAULT = 192; // x100kHz OSC
const int OSC_FREQ_BCM2711 = 540; // x100kHz OSC
const int OSC_FREQ_BCM2712 = 500; // x100kHz OSC - cat /sys/kernel/debug/clk/clk_summary | grep pwm0
// Timer
// Word offsets
#define TIMER_LOAD (0x400 >> 2)
#define TIMER_VALUE (0x404 >> 2)
#define TIMER_CONTROL (0x408 >> 2)
#define TIMER_IRQ_CLR (0x40C >> 2)
#define TIMER_IRQ_RAW (0x410 >> 2)
#define TIMER_IRQ_MASK (0x414 >> 2)
#define TIMER_RELOAD (0x418 >> 2)
#define TIMER_PRE_DIV (0x41C >> 2)
#define TIMER_COUNTER (0x420 >> 2)
// Locals to hold pointers to the hardware
static volatile unsigned int *base ;
static volatile unsigned int *gpio ;
static volatile unsigned int *pwm ;
static volatile unsigned int *clk ;
static volatile unsigned int *pads ;
static volatile unsigned int *timer ;
static volatile unsigned int *timerIrqRaw ;
static volatile unsigned int *rio ;
// Export variables for the hardware pointers
volatile unsigned int *_wiringPiBase ;
volatile unsigned int *_wiringPiGpio ;
volatile unsigned int *_wiringPiPwm ;
volatile unsigned int *_wiringPiClk ;
volatile unsigned int *_wiringPiPads ;
volatile unsigned int *_wiringPiTimer ;
volatile unsigned int *_wiringPiTimerIrqRaw ;
volatile unsigned int *_wiringPiRio ;
// Data for use with the boardId functions.
// The order of entries here to correspond with the PI_MODEL_X
// and PI_VERSION_X defines in wiringPi.h
// Only intended for the gpio command - use at your own risk!
// piGpioBase:
// The base address of the GPIO memory mapped hardware IO
#define GPIO_PERI_BASE_OLD 0x20000000
#define GPIO_PERI_BASE_2835 0x3F000000
#define GPIO_PERI_BASE_2711 0xFE000000
#define GPIO_PERI_BASE_2712 0x00 //unknown - 32-bit mapped global mem access not supported for now
static volatile unsigned int piGpioBase = 0 ;
const char *piModelNames [PI_MODELS_MAX] =
{
"Model A", // 0
"Model B", // 1
"Model A+", // 2
"Model B+", // 3
"Pi 2", // 4
"Alpha", // 5
"CM", // 6
"Unknown07", // 07
"Pi 3", // 08
"Pi Zero", // 09
"CM3", // 10
"Unknown11", // 11
"Pi Zero-W", // 12
"Pi 3B+", // 13
"Pi 3A+", // 14
"Unknown15", // 15
"CM3+", // 16
"Pi 4B", // 17
"Pi Zero2-W", // 18
"Pi 400", // 19
"CM4", // 20
"CM4S", // 21
"Unknown22", // 22
"Pi 5", // 23
"CM5", // 24
"Pi 500", // 25
"CM5 Lite", // 26
} ;
const char *piProcessor [5] =
{
"BCM2835",
"BCM2836",
"BCM2837",
"BCM2711",
"BCM2712",
} ;
const char *piRevisionNames [16] =
{
"00",
"01",
"02",
"03",
"04",
"05",
"06",
"07",
"08",
"09",
"10",
"11",
"12",
"13",
"14",
"15",
} ;
const char *piMakerNames [16] =
{
"Sony UK",// 0
"Egoman", // 1
"Embest", // 2
"Sony Japan",// 3
"Embest", // 4
"Stadium",// 5
"Unknown06", // 6
"Unknown07", // 7
"Unknown08", // 8
"Unknown09", // 9
"Unknown10", // 10
"Unknown11", // 11
"Unknown12", // 12
"Unknown13", // 13
"Unknown14", // 14
"Unknown15", // 15
} ;
const int piMemorySize [8] =
{
256, // 0
512, // 1
1024, // 2
2048, // 3
4096, // 4
8192, // 5
16384, // 6
0, // 7
} ;
// Time for easy calculations
static uint64_t epochMilli, epochMicro ;
// Misc
static int wiringPiMode = WPI_MODE_UNINITIALISED ;
static volatile int pinPass = -1 ;
static pthread_mutex_t pinMutex ;
static int RaspberryPiModel = -1;
static int RaspberryPiLayout = -1;
// Debugging & Return codes
int wiringPiDebug = FALSE ;
int wiringPiReturnCodes = FALSE ;
// Use /dev/gpiomem ?
int wiringPiTryGpioMem = FALSE ;
enum WPIFlag {
WPI_FLAG_INPUT = 0x04,
WPI_FLAG_OUTPUT = 0x08,
WPI_FLAG_BIAS_UP = 0x100,
WPI_FLAG_BIAS_DOWN= 0x200,
WPI_FLAG_BIAS_OFF = 0x400,
};
static unsigned int lineFlags [64] =
{
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
} ;
static int lineFds [64] =
{
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
} ;
static int isrFds [64] =
{
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
} ;
// ISR Data
static int chipFd = -1;
static void* isrUserdata[64];
static void (*isrFunctionsV2[64])(struct WPIWfiStatus, void* userdata) ;
static void (*isrFunctions [64])(void) ;
static pthread_t isrThreads[64];
static int isrEdgeMode[64]; // irq on rising/falling edge
static unsigned long isrDebouncePeriodUs[64]; // 0: debounce is off
// Doing it the Arduino way with lookup tables...
// Yes, it's probably more innefficient than all the bit-twidling, but it
// does tend to make it all a bit clearer. At least to me!
// pinToGpio:
// Take a Wiring pin (0 through X) and re-map it to the BCM_GPIO pin
// Cope for 3 different board revisions here.
static int *pinToGpio ;
// Revision 1, 1.1:
static int pinToGpioR1 [64] =
{
17, 18, 21, 22, 23, 24, 25, 4, // From the Original Wiki - GPIO 0 through 7: wpi 0 - 7
0, 1, // I2C - SDA1, SCL1 wpi 8 - 9
8, 7, // SPI - CE1, CE0 wpi 10 - 11
10, 9, 11, // SPI - MOSI, MISO, SCLK wpi 12 - 14
14, 15, // UART - Tx, Rx wpi 15 - 16
// Padding:
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 31
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 47
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 63
} ;
// Revision 2:
static int pinToGpioR2 [64] =
{
17, 18, 27, 22, 23, 24, 25, 4, // From the Original Wiki - GPIO 0 through 7: wpi 0 - 7
2, 3, // I2C - SDA0, SCL0 wpi 8 - 9
8, 7, // SPI - CE1, CE0 wpi 10 - 11
10, 9, 11, // SPI - MOSI, MISO, SCLK wpi 12 - 14
14, 15, // UART - Tx, Rx wpi 15 - 16
28, 29, 30, 31, // Rev 2: New GPIOs 8 though 11 wpi 17 - 20
5, 6, 13, 19, 26, // B+ wpi 21, 22, 23, 24, 25
12, 16, 20, 21, // B+ wpi 26, 27, 28, 29
0, 1, // B+ wpi 30, 31
// Padding:
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 47
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 63
} ;
// physToGpio:
// Take a physical pin (1 through 26) and re-map it to the BCM_GPIO pin
// Cope for 2 different board revisions here.
// Also add in the P5 connector, so the P5 pins are 3,4,5,6, so 53,54,55,56
static int *physToGpio ;
static int physToGpioR1 [64] =
{
-1, // 0
-1, -1, // 1, 2
0, -1,
1, -1,
4, 14,
-1, 15,
17, 18,
21, -1,
22, 23,
-1, 24,
10, -1,
9, 25,
11, 8,
-1, 7, // 25, 26
-1, -1, -1, -1, -1, // ... 31
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 47
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, // ... 63
} ;
static int physToGpioR2 [64] =
{
-1, // 0
-1, -1, // 1, 2
2, -1,
3, -1,
4, 14,
-1, 15,
17, 18,
27, -1,
22, 23,
-1, 24,
10, -1,
9, 25,
11, 8,
-1, 7, // 25, 26
// B+
0, 1,
5, -1,
6, 12,
13, -1,
19, 16,
26, 20,
-1, 21,
// the P5 connector on the Rev 2 boards:
-1, -1,
-1, -1,
-1, -1,
-1, -1,
-1, -1,
28, 29,
30, 31,
-1, -1,
-1, -1,
-1, -1,
-1, -1,
} ;
int piBoard() {
if (RaspberryPiModel<0) { //need to detect pi model
int model, rev, mem, maker, overVolted;
piBoardId (&model, &rev, &mem, &maker, &overVolted);
}
return RaspberryPiModel<0 ? 0 : 1;
}
int piBoard40Pin() {
if (!piBoard()){
// Board not detected
return -1;
}
switch(RaspberryPiModel){
case PI_MODEL_A:
case PI_MODEL_B:
return 0;
// PI_MODEL_CM
// PI_MODEL_CM3
// PI_MODEL_CM4
// PI_MODEL_CM4S
// ? guess yes
default:
return 1;
}
}
int piRP1Model() {
switch(RaspberryPiModel){
case PI_MODEL_5:
case PI_MODEL_CM5:
case PI_MODEL_500:
case PI_MODEL_CM5L:
return 1;
default:
return 0;
}
}
int GetMaxPin() {
if (piRP1Model()) {
switch(wiringPiMode) {
case WPI_MODE_PHYS:
return 40;
case WPI_MODE_PINS:
return 31;
default:
return 27;
}
} else {
return 63;
}
}
int ToBCMPin(int* pin) {
if (*pin<0 || *pin>63) {
return FALSE;
}
switch(wiringPiMode) {
case WPI_MODE_PINS:
*pin = pinToGpio[*pin];
break;
case WPI_MODE_PHYS:
*pin = physToGpio[*pin];
break;
case WPI_MODE_GPIO:
return TRUE;
default:
return FALSE;
}
if (piRP1Model() && *pin>27) {
return FALSE;
}
return TRUE;
}
#define RETURN_ON_MODEL5 if (piRP1Model()) { if (wiringPiDebug) printf("Function not supported on Pi5\n"); return; }
int FailOnModel5(const char *function) {
if (piRP1Model()) {
return wiringPiFailure (WPI_ALMOST, "Function '%s' not supported on Raspberry Pi 5.\n"
" Unable to continue. Keep an eye of new versions at https://github.com/wiringpi/wiringpi\n", function) ;
}
return 0;
}
// gpioToGPFSEL:
// Map a BCM_GPIO pin to it's Function Selection
// control port. (GPFSEL 0-5)
// Groups of 10 - 3 bits per Function - 30 bits per port
static uint8_t gpioToGPFSEL [] =
{
0,0,0,0,0,0,0,0,0,0,
1,1,1,1,1,1,1,1,1,1,
2,2,2,2,2,2,2,2,2,2,
3,3,3,3,3,3,3,3,3,3,
4,4,4,4,4,4,4,4,4,4,
5,5,5,5,5,5,5,5,5,5,
} ;
// gpioToShift
// Define the shift up for the 3 bits per pin in each GPFSEL port
static uint8_t gpioToShift [] =
{
0,3,6,9,12,15,18,21,24,27,
0,3,6,9,12,15,18,21,24,27,
0,3,6,9,12,15,18,21,24,27,
0,3,6,9,12,15,18,21,24,27,
0,3,6,9,12,15,18,21,24,27,
0,3,6,9,12,15,18,21,24,27,
} ;
// gpioToGPSET:
// (Word) offset to the GPIO Set registers for each GPIO pin
static uint8_t gpioToGPSET [] =
{
7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
} ;
// gpioToGPCLR:
// (Word) offset to the GPIO Clear registers for each GPIO pin
static uint8_t gpioToGPCLR [] =
{
10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,
11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,11,
} ;
// gpioToGPLEV:
// (Word) offset to the GPIO Input level registers for each GPIO pin
static uint8_t gpioToGPLEV [] =
{
13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,13,
14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,
} ;
#ifdef notYetReady
// gpioToEDS
// (Word) offset to the Event Detect Status
static uint8_t gpioToEDS [] =
{
16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,17,
} ;
// gpioToREN
// (Word) offset to the Rising edge ENable register
static uint8_t gpioToREN [] =
{
19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,
20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,20,
} ;
// gpioToFEN
// (Word) offset to the Falling edgde ENable register
static uint8_t gpioToFEN [] =
{
22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,
23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,23,
} ;
#endif
// GPPUD:
// GPIO Pin pull up/down register
#define GPPUD 37
/* 2711 has a different mechanism for pin pull-up/down/enable */
#define GPPUPPDN0 57 /* Pin pull-up/down for pins 15:0 */
#define GPPUPPDN1 58 /* Pin pull-up/down for pins 31:16 */
#define GPPUPPDN2 59 /* Pin pull-up/down for pins 47:32 */
#define GPPUPPDN3 60 /* Pin pull-up/down for pins 57:48 */
static volatile unsigned int piGpioPupOffset = 0 ;
// gpioToPUDCLK
// (Word) offset to the Pull Up Down Clock regsiter
static uint8_t gpioToPUDCLK [] =
{
38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,38,
39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,39,
} ;
// gpioToPwmALT
// the ALT value to put a GPIO pin into PWM mode
static uint8_t gpioToPwmALT [] =
{
0, 0, 0, 0, 0, 0, 0, 0, // 0 -> 7
0, 0, 0, 0, FSEL_ALT0, FSEL_ALT0, 0, 0, // 8 -> 15
0, 0, FSEL_ALT5, FSEL_ALT5, 0, 0, 0, 0, // 16 -> 23
0, 0, 0, 0, 0, 0, 0, 0, // 24 -> 31
0, 0, 0, 0, 0, 0, 0, 0, // 32 -> 39
FSEL_ALT0, FSEL_ALT0, 0, 0, 0, FSEL_ALT0, 0, 0, // 40 -> 47
0, 0, 0, 0, 0, 0, 0, 0, // 48 -> 55
0, 0, 0, 0, 0, 0, 0, 0, // 56 -> 63
} ;
// gpioToPwmPort
// The port value to put a GPIO pin into PWM mode
static uint8_t gpioToPwmPort [] =
{
0, 0, 0, 0, 0, 0, 0, 0, // 0 -> 7
0, 0, 0, 0, PWM0_DATA, PWM1_DATA, 0, 0, // 8 -> 15
0, 0, PWM0_DATA, PWM1_DATA, 0, 0, 0, 0, // 16 -> 23
0, 0, 0, 0, 0, 0, 0, 0, // 24 -> 31
0, 0, 0, 0, 0, 0, 0, 0, // 32 -> 39
PWM0_DATA, PWM1_DATA, 0, 0, 0, PWM1_DATA, 0, 0, // 40 -> 47
0, 0, 0, 0, 0, 0, 0, 0, // 48 -> 55
0, 0, 0, 0, 0, 0, 0, 0, // 56 -> 63
} ;
// gpioToGpClkALT:
// ALT value to put a GPIO pin into GP Clock mode.
// On the Pi we can really only use BCM_GPIO_4 and BCM_GPIO_21
// for clocks 0 and 1 respectively, however I'll include the full
// list for completeness - maybe one day...
#define GPIO_CLOCK_SOURCE 1
// gpioToGpClkALT0:
static uint8_t gpioToGpClkALT0 [] =
{
0, 0, 0, 0, FSEL_ALT0, FSEL_ALT0, FSEL_ALT0, 0, // 0 -> 7
0, 0, 0, 0, 0, 0, 0, 0, // 8 -> 15
0, 0, 0, 0, FSEL_ALT5, FSEL_ALT5, 0, 0, // 16 -> 23
0, 0, 0, 0, 0, 0, 0, 0, // 24 -> 31
FSEL_ALT0, 0, FSEL_ALT0, 0, 0, 0, 0, 0, // 32 -> 39
0, 0, FSEL_ALT0, FSEL_ALT0, FSEL_ALT0, 0, 0, 0, // 40 -> 47
0, 0, 0, 0, 0, 0, 0, 0, // 48 -> 55
0, 0, 0, 0, 0, 0, 0, 0, // 56 -> 63
} ;
// gpioToClk:
// (word) Offsets to the clock Control and Divisor register
static uint8_t gpioToClkCon [] =
{
-1, -1, -1, -1, 28, 30, 32, -1, // 0 -> 7
-1, -1, -1, -1, -1, -1, -1, -1, // 8 -> 15
-1, -1, -1, -1, 28, 30, -1, -1, // 16 -> 23
-1, -1, -1, -1, -1, -1, -1, -1, // 24 -> 31
28, -1, 28, -1, -1, -1, -1, -1, // 32 -> 39
-1, -1, 28, 30, 28, -1, -1, -1, // 40 -> 47
-1, -1, -1, -1, -1, -1, -1, -1, // 48 -> 55
-1, -1, -1, -1, -1, -1, -1, -1, // 56 -> 63
} ;
static uint8_t gpioToClkDiv [] =
{
-1, -1, -1, -1, 29, 31, 33, -1, // 0 -> 7
-1, -1, -1, -1, -1, -1, -1, -1, // 8 -> 15
-1, -1, -1, -1, 29, 31, -1, -1, // 16 -> 23
-1, -1, -1, -1, -1, -1, -1, -1, // 24 -> 31
29, -1, 29, -1, -1, -1, -1, -1, // 32 -> 39
-1, -1, 29, 31, 29, -1, -1, -1, // 40 -> 47
-1, -1, -1, -1, -1, -1, -1, -1, // 48 -> 55
-1, -1, -1, -1, -1, -1, -1, -1, // 56 -> 63
} ;
/*
* Functions
*********************************************************************************
*/
/*
* wiringPiFailure:
* Fail. Or not.
*********************************************************************************
*/
int wiringPiFailure (int fatal, const char *message, ...)
{
va_list argp ;
char buffer [1024] ;
if (!fatal && wiringPiReturnCodes)
return -1 ;
va_start (argp, message) ;
vsnprintf (buffer, 1023, message, argp) ;
va_end (argp) ;
fprintf (stderr, "%s", buffer) ;
exit (EXIT_FAILURE) ;
return 0 ;
}
/*
* setupCheck
* Another sanity check because some users forget to call the setup
* function. Mosty because they need feeding C drip by drip )-:
*********************************************************************************
*/
static void setupCheck (const char *fName)
{
if (!wiringPiSetuped)
{
fprintf (stderr, "%s: You have not called one of the wiringPiSetup\n"
" functions, so I'm aborting your program before it crashes anyway.\n", fName) ;
exit (EXIT_FAILURE) ;
}
}
/*
* gpioMemCheck:
* See if we're using the /dev/gpiomem interface, if-so then some operations
* can't be done and will crash the Pi.
*********************************************************************************
*/
static void usingGpioMemCheck (const char *what)
{
if (usingGpioMem)
{
fprintf (stderr, "%s: Unable to do this when using /dev/gpiomem. Try sudo?\n", what) ;
exit (EXIT_FAILURE) ;
}
}
void PrintSystemStdErr () {
struct utsname sys_info;
if (uname(&sys_info) == 0) {
fprintf (stderr, " WiringPi : %d.%d\n", VERSION_MAJOR, VERSION_MINOR);
fprintf (stderr, " system name : %s\n", sys_info.sysname);
//fprintf (stderr, " node name : %s\n", sys_info.nodename);
fprintf (stderr, " release : %s\n", sys_info.release);
fprintf (stderr, " version : %s\n", sys_info.version);
fprintf (stderr, " machine : %s\n", sys_info.machine);
if (strstr(sys_info.machine, "arm") == NULL && strstr(sys_info.machine, "aarch")==NULL) {
fprintf (stderr, " -> This is not an ARM architecture; it cannot be a Raspberry Pi.\n") ;
}
}
}
void piFunctionOops (const char *function, const char* suggestion, const char* url)
{
fprintf (stderr, "Oops: Function %s is not supported\n", function) ;
PrintSystemStdErr();
if (suggestion) {
fprintf (stderr, " -> Please %s\n", suggestion) ;
}
if (url) {
fprintf (stderr, " -> See info at %s\n", url) ;
}
fprintf (stderr, " -> Check at https://github.com/wiringpi/wiringpi/issues.\n\n") ;
exit (EXIT_FAILURE) ;
}
void ReportDeviceError(const char *function, int pin, const char *mode, int ret) {
fprintf(stderr, "wiringPi: ERROR: ioctl %s of %d (%s) returned error '%s' (%d)\n", function, pin, mode, strerror(errno), ret);
}
/*
* piGpioLayout:
* Return a number representing the hardware revision of the board.
* This is not strictly the board revision but is used to check the
* layout of the GPIO connector - and there are 2 types that we are
* really interested in here. The very earliest Pi's and the
* ones that came after that which switched some pins ....
*
* Revision 1 really means the early Model A and B's.
* Revision 2 is everything else - it covers the B, B+ and CM.
* ... and the Pi 2 - which is a B+ ++ ...
* ... and the Pi 0 - which is an A+ ...
*
* The main difference between the revision 1 and 2 system that I use here
* is the mapping of the GPIO pins. From revision 2, the Pi Foundation changed
* 3 GPIO pins on the (original) 26-way header - BCM_GPIO 22 was dropped and
* replaced with 27, and 0 + 1 - I2C bus 0 was changed to 2 + 3; I2C bus 1.
*
* Additionally, here we set the piModel2 flag too. This is again, nothing to
* do with the actual model, but the major version numbers - the GPIO base
* hardware address changed at model 2 and above (not the Zero though)
*
*********************************************************************************
*/
const char* revfile = "/proc/device-tree/system/linux,revision";
void piGpioLayoutOops (const char *why)
{
fprintf (stderr, "Oops: Unable to determine Raspberry Pi board revision from %s and from /proc/cpuinfo\n", revfile) ;
PrintSystemStdErr();
fprintf (stderr, " -> %s\n", why) ;
fprintf (stderr, " -> WiringPi is designed for Raspberry Pi and can only be used with a Raspberry Pi.\n\n") ;
fprintf (stderr, " -> Check at https://github.com/wiringpi/wiringpi/issues.\n\n") ;
exit (EXIT_FAILURE) ;
}
int piGpioLayout (void)
{
piBoard();
return RaspberryPiLayout;
}
/*
* piBoardRev:
* Deprecated, but does the same as piGpioLayout
*********************************************************************************
*/
int piBoardRev (void)
{
return piGpioLayout () ;
}
const char* GetPiRevision(char* line, int linelength, unsigned int* revision) {
const char* c = NULL;
uint32_t Revision = 0;
_Static_assert(sizeof(Revision)==4, "should be unsigend integer with 4 byte size");
FILE* fp = fopen(revfile,"rb");
if (!fp) {
if (wiringPiDebug)
perror(revfile);
return NULL; // revision file not found or no access
}
int result = fread(&Revision, sizeof(Revision), 1, fp);
fclose(fp);
if (result<1) {
if (wiringPiDebug)
perror(revfile);
return NULL; // read error
}
Revision = bswap_32(Revision);
snprintf(line, linelength, "Revision\t: %04x", Revision);
c = &line[11];
*revision = Revision;
if (wiringPiDebug)
printf("GetPiRevision: Revision string: \"%s\" (%s) - 0x%x\n", line, c, *revision);
return c;
}
/*
* piBoardId:
* Return the real details of the board we have.
*
* This is undocumented and really only intended for the GPIO command.
* Use at your own risk!
*
* Seems there are some boards with 0000 in them (mistake in manufacture)
* So the distinction between boards that I can see is:
*
* 0000 - Error
* 0001 - Not used
*
* Original Pi boards:
* 0002 - Model B, Rev 1, 256MB, Egoman
* 0003 - Model B, Rev 1.1, 256MB, Egoman, Fuses/D14 removed.
*
* Newer Pi's with remapped GPIO:
* 0004 - Model B, Rev 1.2, 256MB, Sony
* 0005 - Model B, Rev 1.2, 256MB, Egoman
* 0006 - Model B, Rev 1.2, 256MB, Egoman
*
* 0007 - Model A, Rev 1.2, 256MB, Egoman
* 0008 - Model A, Rev 1.2, 256MB, Sony
* 0009 - Model A, Rev 1.2, 256MB, Egoman
*
* 000d - Model B, Rev 1.2, 512MB, Egoman (Red Pi, Blue Pi?)
* 000e - Model B, Rev 1.2, 512MB, Sony
* 000f - Model B, Rev 1.2, 512MB, Egoman
*
* 0010 - Model B+, Rev 1.2, 512MB, Sony
* 0013 - Model B+ Rev 1.2, 512MB, Embest
* 0016 - Model B+ Rev 1.2, 512MB, Sony
* 0019 - Model B+ Rev 1.2, 512MB, Egoman
*
* 0011 - Pi CM, Rev 1.1, 512MB, Sony
* 0014 - Pi CM, Rev 1.1, 512MB, Embest
* 0017 - Pi CM, Rev 1.1, 512MB, Sony
* 001a - Pi CM, Rev 1.1, 512MB, Egoman
*
* 0012 - Model A+ Rev 1.1, 256MB, Sony
* 0015 - Model A+ Rev 1.1, 512MB, Embest
* 0018 - Model A+ Rev 1.1, 256MB, Sony
* 001b - Model A+ Rev 1.1, 256MB, Egoman
*
* A small thorn is the olde style overvolting - that will add in
* 1000000
*
* The Pi compute module has an revision of 0011 or 0014 - since we only
* check the last digit, then it's 1, therefore it'll default to not 2 or
* 3 for a Rev 1, so will appear as a Rev 2. This is fine for the most part, but
* we'll properly detect the Compute Module later and adjust accordingly.
*
* And then things changed with the introduction of the v2...
*
* For Pi v2 and subsequent models - e.g. the Zero:
*
* [USER:8] [NEW:1] [MEMSIZE:3] [MANUFACTURER:4] [PROCESSOR:4] [TYPE:8] [REV:4]
* NEW 23: will be 1 for the new scheme, 0 for the old scheme
* MEMSIZE 20: 0=256M 1=512M 2=1G
* MANUFACTURER 16: 0=SONY 1=EGOMAN 2=EMBEST
* PROCESSOR 12: 0=2835 1=2836
* TYPE 04: 0=MODELA 1=MODELB 2=MODELA+ 3=MODELB+ 4=Pi2 MODEL B 5=ALPHA 6=CM
* REV 00: 0=REV0 1=REV1 2=REV2
*********************************************************************************
*/
void piBoardId (int *model, int *rev, int *mem, int *maker, int *warranty)
{
const int maxlength = 120;
char line [maxlength+1] ;
const char *c ;
unsigned int revision = 0x00 ;
int bRev, bType, bProc, bMfg, bMem, bWarranty ;
//piGpioLayoutOops ("this is only a test case");
c = GetPiRevision(line, maxlength, &revision); // device tree
if (NULL==c) {
c = GetPiRevisionLegacy(line, maxlength, &revision); // proc/cpuinfo
}
if (NULL==c) {
piGpioLayoutOops ("GetPiRevision failed!") ;
}
if ((revision & (1 << 23)) != 0) // New style, not available for Raspberry Pi 1B/A, CM
{
if (wiringPiDebug)
printf ("piBoardId: New Way: revision is: %08X\n", revision) ;
bRev = (revision & (0x0F << 0)) >> 0 ;
bType = (revision & (0xFF << 4)) >> 4 ;
bProc = (revision & (0x0F << 12)) >> 12 ; // Not used for now.
bMfg = (revision & (0x0F << 16)) >> 16 ;
bMem = (revision & (0x07 << 20)) >> 20 ;
bWarranty = (revision & (0x03 << 24)) != 0 ;
// Ref: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-revision-codes
*model = bType ;
*rev = bRev ;
*mem = bMem ;
*maker = bMfg ;
*warranty = bWarranty ;
RaspberryPiLayout = GPIO_LAYOUT_DEFAULT ; //default
if (wiringPiDebug)
printf ("piBoardId: rev: %d, type: %d, proc: %d, mfg: %d, mem: %d, warranty: %d\n",
bRev, bType, bProc, bMfg, bMem, bWarranty) ;
}
else // Old way
{
if (wiringPiDebug)
printf ("piBoardId: Old Way: revision is: %s\n", c) ;
if (!isdigit (*c))
piGpioLayoutOops ("Bogus \"Revision\" line (no digit at start of revision)") ;
// Make sure its long enough
if (strlen (c) < 4)
piGpioLayoutOops ("Bogus \"Revision\" line (not long enough)") ;
// If longer than 4, we'll assume it's been overvolted
*warranty = strlen (c) > 4 ;
// Extract last 4 characters:
c = c + strlen (c) - 4 ;
// Fill out the replys as appropriate
RaspberryPiLayout = GPIO_LAYOUT_DEFAULT ; //default
if (strcmp (c, "0002") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; RaspberryPiLayout = GPIO_LAYOUT_PI1_REV1; }
else if (strcmp (c, "0003") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_1 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; RaspberryPiLayout = GPIO_LAYOUT_PI1_REV1; }
else if (strcmp (c, "0004") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_2 ; *mem = 0 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "0005") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_2 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "0006") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_2 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "0007") == 0) { *model = PI_MODEL_A ; *rev = PI_VERSION_1_2 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "0008") == 0) { *model = PI_MODEL_A ; *rev = PI_VERSION_1_2 ; *mem = 0 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "0009") == 0) { *model = PI_MODEL_A ; *rev = PI_VERSION_1_2 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "000d") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "000e") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "000f") == 0) { *model = PI_MODEL_B ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "0010") == 0) { *model = PI_MODEL_BP ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "0013") == 0) { *model = PI_MODEL_BP ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_EMBEST ; }
else if (strcmp (c, "0016") == 0) { *model = PI_MODEL_BP ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "0019") == 0) { *model = PI_MODEL_BP ; *rev = PI_VERSION_1_2 ; *mem = 1 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "0011") == 0) { *model = PI_MODEL_CM ; *rev = PI_VERSION_1_1 ; *mem = 1 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "0014") == 0) { *model = PI_MODEL_CM ; *rev = PI_VERSION_1_1 ; *mem = 1 ; *maker = PI_MAKER_EMBEST ; }
else if (strcmp (c, "0017") == 0) { *model = PI_MODEL_CM ; *rev = PI_VERSION_1_1 ; *mem = 1 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "001a") == 0) { *model = PI_MODEL_CM ; *rev = PI_VERSION_1_1 ; *mem = 1 ; *maker = PI_MAKER_EGOMAN ; }
else if (strcmp (c, "0012") == 0) { *model = PI_MODEL_AP ; *rev = PI_VERSION_1_1 ; *mem = 0 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "0015") == 0) { *model = PI_MODEL_AP ; *rev = PI_VERSION_1_1 ; *mem = 1 ; *maker = PI_MAKER_EMBEST ; }
else if (strcmp (c, "0018") == 0) { *model = PI_MODEL_AP ; *rev = PI_VERSION_1_1 ; *mem = 0 ; *maker = PI_MAKER_SONY ; }
else if (strcmp (c, "001b") == 0) { *model = PI_MODEL_AP ; *rev = PI_VERSION_1_1 ; *mem = 0 ; *maker = PI_MAKER_EGOMAN ; }
else { *model = 0 ; *rev = 0 ; *mem = 0 ; *maker = 0 ; }
}
RaspberryPiModel = *model;
switch (RaspberryPiModel){
case PI_MODEL_A:
case PI_MODEL_B:
case PI_MODEL_AP:
case PI_MODEL_BP:
case PI_ALPHA:
case PI_MODEL_CM:
case PI_MODEL_ZERO:
case PI_MODEL_ZERO_W:
piGpioBase = GPIO_PERI_BASE_OLD ;
piGpioPupOffset = GPPUD ;
break ;
case PI_MODEL_4B:
case PI_MODEL_400:
case PI_MODEL_CM4:
case PI_MODEL_CM4S:
piGpioBase = GPIO_PERI_BASE_2711 ;
piGpioPupOffset = GPPUPPDN0 ;
break ;
case PI_MODEL_5:
case PI_MODEL_CM5:
case PI_MODEL_500:
case PI_MODEL_CM5L:
piGpioBase = GPIO_PERI_BASE_2712 ;
piGpioPupOffset = 0 ;
break ;
default:
piGpioBase = GPIO_PERI_BASE_2835 ;
piGpioPupOffset = GPPUD ;
break ;
}
}
/*
* wpiPinToGpio:
* Translate a wiringPi Pin number to native GPIO pin number.
* Provided for external support.
*********************************************************************************
*/
int wpiPinToGpio (int wpiPin)
{
return pinToGpio [wpiPin & 63] ;
}
/*
* physPinToGpio:
* Translate a physical Pin number to native GPIO pin number.
* Provided for external support.
*********************************************************************************
*/
int physPinToGpio (int physPin)
{
return physToGpio [physPin & 63] ;
}
/*
* setPadDrive:
* Set the PAD driver value
*********************************************************************************
*/
void setPadDrivePin (int pin, int value) {
if (!piRP1Model() || !ToBCMPin(&pin)) {
return;
}
uint32_t wrVal;
value = value & 3; // 0-3 supported
wrVal = (value << 4); //Drive strength 0-3
pads[1+pin] = (pads[1+pin] & RP1_INV_PAD_DRIVE_MASK) | wrVal;
if (wiringPiDebug) {
printf ("setPadDrivePin: pin: %d, value: %d (%08X)\n", pin, value, pads[1+pin]) ;
}
}
void setPadDrive (int group, int value)
{
uint32_t wrVal, rdVal;
if ((wiringPiMode == WPI_MODE_PINS) || (wiringPiMode == WPI_MODE_PHYS) || (wiringPiMode == WPI_MODE_GPIO))
{
value = value & 7; // 0-7 supported
if (piRP1Model()) {
if (-1==group) {
printf ("Pad register:\n");
for (int pin=0, maxpin=GetMaxPin(); pin<=maxpin; ++pin) {
unsigned int drive = (pads[1+pin] & RP1_PAD_DRIVE_MASK)>>4;
printf (" Pin %2d: 0x%08X drive: 0x%d = %2dmA\n", pin, pads[1+pin], drive, 0==drive ? 2 : drive*4) ;
}
}
if (group !=0) { // only GPIO range @RP1
return ;
}
switch(value) {
default:
/* bcm*/ // RP1
case 0: /* 2mA*/ value=0; break; // 2mA
case 1: /* 4mA*/
case 2: /* 6mA*/ value=1; break; // 4mA
case 3: /* 8mA*/
case 4: /*10mA*/ value=2; break; // 8mA
case 5: /*12mA*/
case 6: /*14mA*/
case 7: /*16mA*/ value=3; break; //12mA
}
wrVal = (value << 4); //Drive strength 0-3
//set for all pins even when it's avaiable for each pin separately
for (int pin=0, maxpin=GetMaxPin(); pin<=maxpin; ++pin) {
pads[1+pin] = (pads[1+pin] & RP1_INV_PAD_DRIVE_MASK) | wrVal;
}
rdVal = pads[1+17]; // only pin 17 readback, for logging
} else {
if (-1==group) {
printf ("Pad register: Group 0: 0x%08X, Group 1: 0x%08X, Group 2: 0x%08X\n", *(pads + 0 + 11), *(pads + 1 + 11), *(pads + 2 + 11)) ;
}
if ((group < 0) || (group > 2))
return ;
wrVal = BCM_PASSWORD | 0x18 | value; //Drive strength 0-7
*(pads + group + 11) = wrVal ;
rdVal = *(pads + group + 11);
}
if (wiringPiDebug)
{
printf ("setPadDrive: Group: %d, value: %d (%08X)\n", group, value, wrVal) ;
printf ("Read : %08X\n", rdVal) ;
}
}
}
/*
* getAlt:
* Returns the ALT bits for a given port. Only really of-use
* for the gpio readall command (I think)
*********************************************************************************
*/
int getAlt (int pin)
{
int alt;
if (!ToBCMPin(&pin)) {
return 0;
}
if (piRP1Model()) {
alt = (gpio[2*pin+1] & RP1_FSEL_NONE_HW); //0-4 function
/*
BCM:
000b = GPIO Pin 9 is an input
001b = GPIO Pin 9 is an output
100b = GPIO Pin 9 takes alternate function 0
101b = GPIO Pin 9 takes alternate function 1
110b = GPIO Pin 9 takes alternate function 2
111b = GPIO Pin 9 takes alternate function 3
011b = GPIO Pin 9 takes alternate function 4
010b = GPIO Pin 9 takes alternate function 5
RP1:
8 = alternate function 6
9 = alternate function 7
10 = alternate function 8
11 = alternate function 9
*/
switch(alt) {
case 0: return FSEL_ALT0;
case 1: return FSEL_ALT1;
case 2: return FSEL_ALT2;
case 3: return FSEL_ALT3;
case 4: return FSEL_ALT4;
case RP1_FSEL_GPIO: {
unsigned int outputmask = gpio[2*pin] & 0x3000; //Bit13-OETOPAD + Bit12-OEFROMPERI
return (outputmask==0x3000) ? FSEL_OUTP : FSEL_INPT;
}
case 6: return FSEL_ALT6;
case 7: return FSEL_ALT7;
case 8: return FSEL_ALT8;
case RP1_FSEL_NONE: return FSEL_ALT9;
default:return alt;
}
} else {
int fSel = gpioToGPFSEL [pin] ;
int shift = gpioToShift [pin] ;
alt = (*(gpio + fSel) >> shift) & 7 ;
}
return alt;
}
enum WPIPinAlt getPinModeAlt(int pin) {
return (enum WPIPinAlt) getAlt(pin);
}
/*
* pwmSetMode:
* Select the native "balanced" mode, or standard mark:space mode
*********************************************************************************
*/
void pwmSetMode (int mode)
{
if ((wiringPiMode == WPI_MODE_PINS) || (wiringPiMode == WPI_MODE_PHYS) || (wiringPiMode == WPI_MODE_GPIO))
{
if (piRP1Model()) {
if(mode != PWM_MODE_MS) {
fprintf(stderr, "pwmSetMode: Raspberry Pi 5 missing feature PWM BAL mode\n");
}
return;
}
if (mode == PWM_MODE_MS) {
*(pwm + PWM_CONTROL) = PWM0_ENABLE | PWM1_ENABLE | PWM0_MS_MODE | PWM1_MS_MODE ;
} else {
*(pwm + PWM_CONTROL) = PWM0_ENABLE | PWM1_ENABLE ;
}
if (wiringPiDebug) {
printf ("Enable PWM mode: %s. Current register: 0x%08X\n", mode == PWM_MODE_MS ? "mark:space (freq. stable)" : "balanced (freq. change)", *(pwm + PWM_CONTROL));
}
}
}
/*
* pwmSetRange:
* Set the PWM range register. We set both range registers to the same
* value. If you want different in your own code, then write your own.
*********************************************************************************
*/
void pwmSetRange (unsigned int range)
{
if ((wiringPiMode == WPI_MODE_PINS) || (wiringPiMode == WPI_MODE_PHYS) || (wiringPiMode == WPI_MODE_GPIO))
{
/* would be possible on ms mode but not on bal, deactivated, use pwmc modify instead
if (piGpioBase == GPIO_PERI_BASE_2711) {
range = (OSC_FREQ_BCM2711*range)/OSC_FREQ_DEFAULT;
}
*/
if (!pwm) {
fprintf(stderr, "wiringPi: pwmSetRange but no pwm memory available, ignoring\n");
return;
}
int readback = 0x00;
if (piRP1Model()) {
pwm[RP1_PWM0_CHAN0_RANGE] = range;
pwm[RP1_PWM0_CHAN1_RANGE] = range;
pwm[RP1_PWM0_CHAN2_RANGE] = range;
pwm[RP1_PWM0_CHAN3_RANGE] = range;
readback = pwm[RP1_PWM0_CHAN0_RANGE];
} else {
*(pwm + PWM0_RANGE) = range ; delayMicroseconds (10) ;
*(pwm + PWM1_RANGE) = range ; delayMicroseconds (10) ;
readback = *(pwm + PWM0_RANGE);
}
if (wiringPiDebug) {
printf ("PWM range: %u. Current register: 0x%08X\n", range, readback);
}
}
}
/*
* pwmSetClock:
* Set/Change the PWM clock. Originally my code, but changed
* (for the better!) by Chris Hall, <chris@kchall.plus.com>
* after further study of the manual and testing with a 'scope
*********************************************************************************
*/
void pwmSetClock (int divisor)
{
uint32_t pwm_control ;
if (!clk) {
fprintf(stderr, "wiringPi: pwmSetClock but no clk memory available, ignoring\n");
return;
}
if (divisor > PWMCLK_DIVI_MAX) {
divisor = PWMCLK_DIVI_MAX; // even on Pi5 4095 is OK
}
if (piRP1Model()) {
if (divisor < 1) {
if (wiringPiDebug) { printf("Disable PWM0 clock"); }
clk[CLK_PWM0_CTRL] = RP1_CLK_PWM0_CTRL_DISABLE_MAGIC; // 0 = disable on Pi5
} else {
divisor = (OSC_FREQ_BCM2712*divisor)/OSC_FREQ_DEFAULT;
if (wiringPiDebug) {
printf ("PWM clock divisor: %d\n", divisor) ;
}
//clk[CLK_PWM0_CTRL] = RP1_CLK_PWM0_CTRL_DISABLE_MAGIC;
//delayMicroseconds(100);
clk[CLK_PWM0_DIV_INT] = divisor;
clk[CLK_PWM0_DIV_FRAC] = 0;
clk[CLK_PWM0_SEL] = 1;
clk[CLK_PWM0_CTRL] = RP1_CLK_PWM0_CTRL_ENABLE_MAGIC;
}
return;
}
if (piGpioBase == GPIO_PERI_BASE_2711) {
//calculate value for OSC 54MHz -> 19.2MHz
// Pi 4 max divisor is 1456, Pi0-3 is 4095 (0xFFF)
divisor = (OSC_FREQ_BCM2711*divisor)/OSC_FREQ_DEFAULT;
}
if (divisor < 1) {
divisor = 1;
}
if ((wiringPiMode == WPI_MODE_PINS) || (wiringPiMode == WPI_MODE_PHYS) || (wiringPiMode == WPI_MODE_GPIO))
{
if (wiringPiDebug) {
printf ("PWM clock divisor: Old register: 0x%08X\n", *(clk + PWMCLK_DIV)) ;
}
pwm_control = *(pwm + PWM_CONTROL) ; // preserve PWM_CONTROL
// We need to stop PWM prior to stopping PWM clock in MS mode otherwise BUSY
// stays high.
*(pwm + PWM_CONTROL) = 0 ; // Stop PWM
// Stop PWM clock before changing divisor. The delay after this does need to
// this big (95uS occasionally fails, 100uS OK), it's almost as though the BUSY
// flag is not working properly in balanced mode. Without the delay when DIV is
// adjusted the clock sometimes switches to very slow, once slow further DIV
// adjustments do nothing and it's difficult to get out of this mode.
*(clk + PWMCLK_CNTL) = BCM_PASSWORD | 0x01 ; // Stop PWM Clock
delayMicroseconds (110) ; // prevents clock going sloooow
while ((*(clk + PWMCLK_CNTL) & 0x80) != 0) // Wait for clock to be !BUSY
delayMicroseconds (1) ;
*(clk + PWMCLK_DIV) = BCM_PASSWORD | (divisor << 12) ;
*(clk + PWMCLK_CNTL) = BCM_PASSWORD | 0x11 ; // Start PWM clock
*(pwm + PWM_CONTROL) = pwm_control ; // restore PWM_CONTROL
if (wiringPiDebug) {
printf ("PWM clock divisor %d. Current register: 0x%08X\n", divisor, *(clk + PWMCLK_DIV));
}
}
}
/*
* gpioClockSet:
* Set the frequency on a GPIO clock pin
*********************************************************************************
*/
void gpioClockSet (int pin, int freq)
{
int divi, divr, divf ;
FailOnModel5("gpioClockSet");
if (!ToBCMPin(&pin)) {
return;
}
divi = 19200000 / freq ;
divr = 19200000 % freq ;
divf = (int)((double)divr * 4096.0 / 19200000.0) ;
if (divi > PWMCLK_DIVI_MAX) {
divi = PWMCLK_DIVI_MAX;
}
*(clk + gpioToClkCon [pin]) = BCM_PASSWORD | GPIO_CLOCK_SOURCE ; // Stop GPIO Clock
while ((*(clk + gpioToClkCon [pin]) & 0x80) != 0) // ... and wait
;
*(clk + gpioToClkDiv [pin]) = BCM_PASSWORD | (divi << 12) | divf ; // Set dividers
*(clk + gpioToClkCon [pin]) = BCM_PASSWORD | 0x10 | GPIO_CLOCK_SOURCE ; // Start Clock
}
/*
* wiringPiFindNode:
* Locate our device node
*********************************************************************************
*/
struct wiringPiNodeStruct *wiringPiFindNode (int pin)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
while (node != NULL)
if ((pin >= node->pinBase) && (pin <= node->pinMax))
return node ;
else
node = node->next ;
return NULL ;
}
/*
* wiringPiNewNode:
* Create a new GPIO node into the wiringPi handling system
*********************************************************************************
*/
static void pinModeDummy (UNU struct wiringPiNodeStruct *node, UNU int pin, UNU int mode) { return ; }
static void pullUpDnControlDummy (UNU struct wiringPiNodeStruct *node, UNU int pin, UNU int pud) { return ; }
static int digitalReadDummy (UNU struct wiringPiNodeStruct *node, UNU int UNU pin) { return LOW ; }
static void digitalWriteDummy (UNU struct wiringPiNodeStruct *node, UNU int pin, UNU int value) { return ; }
static void pwmWriteDummy (UNU struct wiringPiNodeStruct *node, UNU int pin, UNU int value) { return ; }
static int analogReadDummy (UNU struct wiringPiNodeStruct *node, UNU int pin) { return 0 ; }
static void analogWriteDummy (UNU struct wiringPiNodeStruct *node, UNU int pin, UNU int value) { return ; }
struct wiringPiNodeStruct *wiringPiNewNode (int pinBase, int numPins)
{
int pin ;
struct wiringPiNodeStruct *node ;
// Minimum pin base is 64
if (pinBase < 64)
(void)wiringPiFailure (WPI_FATAL, "wiringPiNewNode: pinBase of %d is < 64\n", pinBase) ;
// Check all pins in-case there is overlap:
for (pin = pinBase ; pin < (pinBase + numPins) ; ++pin)
if (wiringPiFindNode (pin) != NULL)
(void)wiringPiFailure (WPI_FATAL, "wiringPiNewNode: Pin %d overlaps with existing definition\n", pin) ;
node = (struct wiringPiNodeStruct *)calloc(1, sizeof (struct wiringPiNodeStruct)); // calloc zeros
if (node == NULL)
(void)wiringPiFailure (WPI_FATAL, "wiringPiNewNode: Unable to allocate memory: %s\n", strerror (errno)) ;
node->pinBase = pinBase ;
node->pinMax = pinBase + numPins - 1 ;
node->pinMode = pinModeDummy ;
node->pullUpDnControl = pullUpDnControlDummy ;
node->digitalRead = digitalReadDummy ;
node->digitalWrite = digitalWriteDummy ;
node->pwmWrite = pwmWriteDummy ;
node->analogRead = analogReadDummy ;
node->analogWrite = analogWriteDummy ;
node->next = wiringPiNodes ;
wiringPiNodes = node ;
return node ;
}
#ifdef notYetReady
/*
* pinED01:
* pinED10:
* Enables edge-detect mode on a pin - from a 0 to a 1 or 1 to 0
* Pin must already be in input mode with appropriate pull up/downs set.
*********************************************************************************
*/
void pinEnableED01Pi (int pin)
{
pin = pinToGpio [pin & 63] ;
}
#endif
#define ZeroMemory(Destination,Length) memset((Destination),0,(Length))
int OpenAndCheckGpioChip(int GPIONo, const char* label, const unsigned int lines) {
char szGPIOChip[30];
sprintf(szGPIOChip, "/dev/gpiochip%d", GPIONo);
int Fd = open(szGPIOChip, O_RDWR);
if (Fd < 0) {
fprintf(stderr, "wiringPi: ERROR: %s open ret=%d\n", szGPIOChip, Fd);
return Fd;
} else {
if (wiringPiDebug) {
printf("wiringPi: Open chip %s succeded, fd=%d\n", szGPIOChip, Fd) ;
}
struct gpiochip_info chipinfo;
ZeroMemory(&chipinfo, sizeof(chipinfo));
int ret = ioctl(Fd, GPIO_GET_CHIPINFO_IOCTL, &chipinfo);
if (0==ret) {
if (wiringPiDebug) {
printf("%s: name=%s, label=%s, lines=%u\n", szGPIOChip, chipinfo.name, chipinfo.label, chipinfo.lines) ;
}
int chipOK = 1;
if (label[0]!='\0' && NULL==strstr(chipinfo.label, label)) {
chipOK = 0;
}
if (lines>0 && chipinfo.lines!=lines) {
chipOK = 0;
}
if (chipOK) {
if (wiringPiDebug) {
printf("%s: valid, fd=%d\n", szGPIOChip, Fd);
}
} else {
if (wiringPiDebug) {
printf("%s: invalid, search for '%s' with %u lines!\n", szGPIOChip, label, lines) ;
}
close(Fd);
return -1; // invalid chip
}
}
}
return Fd;
}
int wiringPiGpioDeviceGetFd() {
if (chipFd<0) {
piBoard();
if (piRP1Model()) {
chipFd = OpenAndCheckGpioChip(0, "rp1", 54); // /dev/gpiochip0 @ Pi5 since Kernel 6.6.47
if (chipFd<0) {
chipFd = OpenAndCheckGpioChip(4, "rp1", 54); // /dev/gpiochip4 @ Pi5 with older kernel
}
} else {
// not all Pis have same number of lines: Pi0, Pi1, Pi3, 54 lines, Pi4, 58 lines (CM ?), see #280, so this check is disabled
chipFd = OpenAndCheckGpioChip(0, "bcm", 0);
}
}
return chipFd;
}
void releaseLine(int pin) {
if (wiringPiDebug)
printf ("releaseLine: pin:%d\n", pin) ;
lineFlags[pin] = 0;
close(lineFds[pin]);
lineFds[pin] = -1;
isrDebouncePeriodUs[pin] = 0;
}
int requestLineV2(int pin, const unsigned int lineRequestFlags) {
struct gpio_v2_line_request req;
struct gpio_v2_line_config config;
int ret;
if (lineFds[pin]>=0) {
if (lineRequestFlags == lineFlags[pin]) {
//already requested
return lineFds[pin];
} else {
//different request -> rerequest
releaseLine(pin);
}
}
//requested line
if (wiringPiGpioDeviceGetFd()<0) {
return -1; // error
}
memset(&req, 0, sizeof(req));
memset(&config, 0, sizeof(config));
if (lineRequestFlags & WPI_FLAG_INPUT) {
config.flags |= GPIO_V2_LINE_FLAG_INPUT;
}
if (lineRequestFlags & WPI_FLAG_OUTPUT) {
config.flags |= GPIO_V2_LINE_FLAG_OUTPUT;
}
if (lineRequestFlags & WPI_FLAG_BIAS_OFF) {
config.flags |= GPIO_V2_LINE_FLAG_BIAS_DISABLED;
}
if (lineRequestFlags & WPI_FLAG_BIAS_UP) {
config.flags |= GPIO_V2_LINE_FLAG_BIAS_PULL_UP;
}
if (lineRequestFlags & WPI_FLAG_BIAS_DOWN) {
config.flags |= GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN;
}
if (wiringPiDebug) {
printf ("requestLine flags v2: %llu\n", config.flags);
}
strcpy(req.consumer, "wiringpi_gpio_req");
req.offsets[0] = pin;
req.num_lines = 1;
req.config = config;
ret = ioctl(chipFd, GPIO_V2_GET_LINE_IOCTL, &req);
if (ret || req.fd<0) {
ReportDeviceError("get line handle v2", pin, "RequestLine", ret);
return -1; // error
}
lineFlags[pin] = lineRequestFlags;
lineFds[pin] = req.fd;
if (wiringPiDebug)
printf ("requestLine succeeded: pin:%d, flags: 0x%u, fd :%d\n", pin, lineRequestFlags, lineFds[pin]) ;
return lineFds[pin];
}
/*
*********************************************************************************
* Core Functions
*********************************************************************************
*/
/*
* pinModeAlt:
* This is an un-documented special to let you set any pin to any mode
*********************************************************************************
*/
void pinModeAlt (int pin, int mode)
{
setupCheck ("pinModeAlt") ;
if (!ToBCMPin(&pin)) {
return;
}
if (piRP1Model()) {
//confusion! diffrent to to BCM! this is taking directly the value for the register
int modeRP1;
switch(mode) {
case FSEL_ALT0:
modeRP1 = 0;
break;
case FSEL_ALT1:
modeRP1 = 1;
break;
case FSEL_ALT2:
modeRP1 = 2;
break;
case FSEL_ALT3:
modeRP1 = 3;
break;
case FSEL_ALT4:
modeRP1 = 4;
break;
case FSEL_ALT5:
modeRP1 = 5;
break;
case FSEL_ALT6:
modeRP1 = 6;
break;
case FSEL_ALT7:
modeRP1 = 7;
break;
case FSEL_ALT8:
modeRP1 = 8;
break;
case FSEL_OUTP:
case FSEL_INPT:
modeRP1 = RP1_FSEL_GPIO;
break;
default:
fprintf(stderr, "pinModeAlt: invalid mode %d\n", mode);
return;
}
//printf("pinModeAlt: Pi5 alt pin %d to %d\n", pin, modeRP1);
gpio[2*pin+1] = (modeRP1 & RP1_FSEL_NONE_HW) | RP1_DEBOUNCE_DEFAULT; //0-4 function, 5-11 debounce time
} else {
int fSel = gpioToGPFSEL [pin] ;
int shift = gpioToShift [pin] ;
*(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) | ((mode & 0x7) << shift) ;
}
}
/*
* pinMode:
* Sets the mode of a pin to be input, output or PWM output
*********************************************************************************
*/
//Default: rp1_set_pad(pin, 0, 1, 0, 1, 1, 1, 0);
void rp1_set_pad(int pin, int slewfast, int schmitt, int pulldown, int pullup, int drive, int inputenable, int outputdisable) {
pads[1+pin] = (slewfast != 0) | ((schmitt != 0) << 1) | ((pulldown != 0) << 2) | ((pullup != 0) << 3) | ((drive & 0x3) << 4) | ((inputenable != 0) << 6) | ((outputdisable != 0) << 7);
}
void pinModeFlagsDevice (int pin, int mode, const unsigned int flags) {
unsigned int lflag = flags;
if (wiringPiDebug) {
printf ("pinModeFlagsDevice: pin:%d mode:%d, flags: %u\n", pin, mode, flags) ;
}
lflag &= ~(WPI_FLAG_INPUT | WPI_FLAG_OUTPUT);
switch(mode) {
default:
fprintf(stderr, "pinMode: invalid mode request (only input und output supported)\n");
return;
case INPUT:
lflag |= WPI_FLAG_INPUT;
break;
case OUTPUT:
lflag |= WPI_FLAG_OUTPUT;
break;
case PM_OFF:
pinModeFlagsDevice(pin, INPUT, 0);
releaseLine(pin);
return;
}
requestLineV2(pin, lflag);
}
void pinModeDevice (int pin, int mode) {
pinModeFlagsDevice(pin, mode, lineFlags[pin]);
}
void pinMode (int pin, int mode)
{
int fSel, shift, alt ;
struct wiringPiNodeStruct *node = wiringPiNodes ;
int origPin = pin ;
if (wiringPiDebug)
printf ("pinMode: pin:%d mode:%d\n", pin, mode) ;
setupCheck ("pinMode") ;
if ((pin & PI_GPIO_MASK) == 0) // On-board pin
{
switch(wiringPiMode) {
default: //WPI_MODE_GPIO_SYS
fprintf(stderr, "pinMode: invalid mode\n");
return;
case WPI_MODE_PINS:
pin = pinToGpio [pin];
break;
case WPI_MODE_PHYS:
pin = physToGpio [pin];
break;
case WPI_MODE_GPIO_DEVICE_BCM:
pinModeDevice(pin, mode);
return;
case WPI_MODE_GPIO_DEVICE_WPI:
pinModeDevice(pinToGpio[pin], mode);
return;
case WPI_MODE_GPIO_DEVICE_PHYS:
pinModeDevice(physToGpio[pin], mode);
return;
case WPI_MODE_GPIO:
break;
}
if (wiringPiDebug)
printf ("pinMode: bcm pin:%d mode:%d\n", pin, mode) ;
softPwmStop (origPin) ;
softToneStop (origPin) ;
fSel = gpioToGPFSEL [pin] ;
shift = gpioToShift [pin] ;
if (INPUT==mode || PM_OFF==mode) {
if (piRP1Model()) {
if (INPUT==mode) {
pads[1+pin] = (pin<=8) ? RP1_PAD_DEFAULT_0TO8 : RP1_PAD_DEFAULT_FROM9;
gpio[2*pin+1] = RP1_FSEL_GPIO | RP1_DEBOUNCE_DEFAULT; // GPIO
rio[RP1_RIO_OE + RP1_CLR_OFFSET] = 1<<pin; // Input
} else { //PM_OFF
pads[1+pin] = (pin<=8) ? RP1_PAD_IC_DEFAULT_0TO8 : RP1_PAD_IC_DEFAULT_FROM9;
gpio[2*pin+1] = RP1_IRQRESET | RP1_FSEL_NONE_HW | RP1_DEBOUNCE_DEFAULT; // default but with irq reset
}
} else {
*(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) ; // Sets bits to zero = input
}
if (PM_OFF==mode && !usingGpioMem && pwm && gpioToPwmALT[pin]>0) { //PWM pin -> reset
pwmWrite(origPin, 0);
int channel = gpioToPwmPort[pin];
if (channel>=0 && channel<=3 && piRP1Model()) {
unsigned int ctrl = pwm[RP1_PWM0_GLOBAL_CTRL];
pwm[RP1_PWM0_GLOBAL_CTRL] = (ctrl & ~(1<<channel)) | RP1_PWM_CTRL_SETUPDATE;
//printf("Disable PWM0[%d] (0x%08X->0x%08X)\n", channel, ctrl, pwm[RP1_PWM0_GLOBAL_CTRL]);
}
}
} else if (mode == OUTPUT) {
if (piRP1Model()) {
pads[1+pin] = (pin<=8) ? RP1_PAD_DEFAULT_0TO8 : RP1_PAD_DEFAULT_FROM9;
gpio[2*pin+1] = RP1_FSEL_GPIO | RP1_DEBOUNCE_DEFAULT; // GPIO
rio[RP1_RIO_OE + RP1_SET_OFFSET] = 1<<pin; // Output
} else {
*(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) | (1 << shift) ;
}
} else if (mode == SOFT_PWM_OUTPUT) {
softPwmCreate (origPin, 0, 100) ;
} else if (mode == SOFT_TONE_OUTPUT) {
softToneCreate (origPin) ;
} else if (mode == PWM_TONE_OUTPUT)
{
pinMode (origPin, PWM_OUTPUT) ; // Call myself to enable PWM mode
pwmSetMode (PWM_MODE_MS) ;
}
else if (PWM_OUTPUT==mode || PWM_MS_OUTPUT==mode || PWM_BAL_OUTPUT==mode) {
usingGpioMemCheck("pinMode PWM") ; // exit on error!
alt = gpioToPwmALT[pin];
if (0==alt) { // Not a hardware capable PWM pin
return;
}
int channel = gpioToPwmPort[pin];
if (piRP1Model()) {
if (channel>=0 && channel<=3) {
// enable channel pwm m:s mode
pwm[RP1_PWM0_CHAN_START+RP1_PWM0_CHAN_OFFSET*channel+RP1_PWM0_CHAN_CTRL] = (RP1_PWM_TRAIL_EDGE_MS | RP1_PWM_FIFO_POP_MASK);
// enable pwm global
unsigned int ctrl = pwm[RP1_PWM0_GLOBAL_CTRL];
pwm[RP1_PWM0_GLOBAL_CTRL] = ctrl | (1<<channel) | RP1_PWM_CTRL_SETUPDATE;
//printf("Enable PWM0[%d] (0x%08X->0x%08X)\n", channel, ctrl, pwm[RP1_PWM0_GLOBAL_CTRL]);
//change GPIO mode
pads[1+pin] = RP1_PAD_DEFAULT_FROM9; // enable output
pinModeAlt(origPin, alt); //switch to PWM mode
}
} else {
// Set pin to PWM mode
*(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) | (alt << shift) ;
delayMicroseconds (110) ; // See comments in pwmSetClockWPi
if (PWM_OUTPUT==mode || PWM_BAL_OUTPUT==mode) {
pwmSetMode(PWM_MODE_BAL); // Pi default mode
} else {
pwmSetMode(PWM_MODE_MS);
}
}
if (PWM_OUTPUT==mode) { // predefine
pwmSetRange (1024) ; // Default range of 1024
pwmSetClock (32) ; // 19.2 / 32 = 600KHz - Also starts the PWM
}
}
else if (mode == GPIO_CLOCK)
{
RETURN_ON_MODEL5
if ((alt = gpioToGpClkALT0 [pin]) == 0) // Not a GPIO_CLOCK pin
return ;
usingGpioMemCheck ("pinMode CLOCK") ;
// Set pin to GPIO_CLOCK mode and set the clock frequency to 100KHz
*(gpio + fSel) = (*(gpio + fSel) & ~(7 << shift)) | (alt << shift) ;
delayMicroseconds (110) ;
gpioClockSet (pin, 100000) ;
}
}
else
{
if ((node = wiringPiFindNode (pin)) != NULL)
node->pinMode (node, pin, mode) ;
return ;
}
}
/*
* pullUpDownCtrl:
* Control the internal pull-up/down resistors on a GPIO pin.
*********************************************************************************
*/
void pullUpDnControlDevice (int pin, int pud) {
unsigned int flag = lineFlags[pin];
unsigned int biasflags = WPI_FLAG_BIAS_OFF | WPI_FLAG_BIAS_UP | WPI_FLAG_BIAS_DOWN;
flag &= ~biasflags;
switch (pud){
case PUD_OFF: flag |= WPI_FLAG_BIAS_OFF; break;
case PUD_UP: flag |= WPI_FLAG_BIAS_UP; break;
case PUD_DOWN: flag |= WPI_FLAG_BIAS_DOWN; break;
default: return ; /* An illegal value */
}
// reset input/output
if (lineFlags[pin] & WPI_FLAG_OUTPUT) {
pinModeFlagsDevice (pin, OUTPUT, flag);
} else if(lineFlags[pin] & WPI_FLAG_INPUT) {
pinModeFlagsDevice (pin, INPUT, flag);
} else {
lineFlags[pin] = flag; // only store for later
}
}
void pullUpDnControl (int pin, int pud)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
setupCheck ("pullUpDnControl") ;
if ((pin & PI_GPIO_MASK) == 0) // On-Board Pin
{
switch(wiringPiMode) {
default: //WPI_MODE_GPIO_SYS
fprintf(stderr, "pinMode: invalid mode\n");
return;
case WPI_MODE_PINS:
pin = pinToGpio [pin];
break;
case WPI_MODE_PHYS:
pin = physToGpio [pin];
break;
case WPI_MODE_GPIO_DEVICE_BCM:
return pullUpDnControlDevice(pin, pud);
case WPI_MODE_GPIO_DEVICE_WPI:
return pullUpDnControlDevice(pinToGpio[pin], pud);
case WPI_MODE_GPIO_DEVICE_PHYS:
return pullUpDnControlDevice(physToGpio[pin], pud);
case WPI_MODE_GPIO:
break;
}
if (piRP1Model()) {
unsigned int pullbits = pads[1+pin] & RP1_INV_PUD_MASK; // remove bits
switch (pud){
case PUD_OFF: pads[1+pin] = pullbits; break;
case PUD_UP: pads[1+pin] = pullbits | RP1_PUD_UP; break;
case PUD_DOWN: pads[1+pin] = pullbits | RP1_PUD_DOWN; break;
default: return ; /* An illegal value */
}
} else {
if (piGpioPupOffset == GPPUPPDN0)
{
// Pi 4B pull up/down method
int pullreg = GPPUPPDN0 + (pin>>4);
int pullshift = (pin & 0xf) << 1;
unsigned int pullbits;
unsigned int pull;
switch (pud) {
case PUD_OFF: pull = 0; break;
case PUD_UP: pull = 1; break;
case PUD_DOWN: pull = 2; break;
default: return ; /* An illegal value */
}
pullbits = *(gpio + pullreg);
pullbits &= ~(3 << pullshift);
pullbits |= (pull << pullshift);
*(gpio + pullreg) = pullbits;
}
else
{
// legacy pull up/down method
*(gpio + GPPUD) = pud & 3 ; delayMicroseconds (5) ;
*(gpio + gpioToPUDCLK [pin]) = 1 << (pin & 31) ; delayMicroseconds (5) ;
*(gpio + GPPUD) = 0 ; delayMicroseconds (5) ;
*(gpio + gpioToPUDCLK [pin]) = 0 ; delayMicroseconds (5) ;
}
}
}
else // Extension module
{
if ((node = wiringPiFindNode (pin)) != NULL)
node->pullUpDnControl (node, pin, pud) ;
return ;
}
}
/*
helper functions for gpio_v2_line_values bits
*/
static inline void gpiotools_set_bit(__u64 *b, int n)
{
*b |= _BITULL(n);
}
static inline void gpiotools_clear_bit(__u64 *b, int n)
{
*b &= ~_BITULL(n);
}
static inline void gpiotools_assign_bit(__u64 *b, int n, bool value)
{
if (value)
gpiotools_set_bit(b, n);
else
gpiotools_clear_bit(b, n);
}
static inline int gpiotools_test_bit(__u64 b, int n)
{
return !!(b & _BITULL(n));
}
//*********************************************
/*
* digitalRead:
* Read the value of a given Pin, returning HIGH or LOW
*********************************************************************************
*/
int digitalReadDeviceV2(int pin) { // INPUT and OUTPUT should work
struct gpio_v2_line_values lv;
int ret;
if (lineFds[pin]<0) {
// line not requested - auto request on first read as input
pinModeDevice(pin, INPUT);
}
lv.mask = 0;
lv.bits = 0;
if (lineFds[pin]>=0) {
gpiotools_set_bit(&lv.mask, 0);
ret = ioctl(lineFds[pin], GPIO_V2_LINE_GET_VALUES_IOCTL, &lv);
if (ret) {
ReportDeviceError("get line values", pin, "digitalRead", ret);
return LOW; // error
}
return gpiotools_test_bit(lv.bits, 0);
}
return LOW; // error , need to request line before
}
int digitalRead (int pin)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
if ((pin & PI_GPIO_MASK) == 0) // On-Board Pin
{
switch(wiringPiMode) {
default: //WPI_MODE_GPIO_SYS
fprintf(stderr, "digitalRead: invalid mode\n");
return LOW;
case WPI_MODE_PINS:
pin = pinToGpio [pin];
break;
case WPI_MODE_PHYS:
pin = physToGpio [pin];
break;
case WPI_MODE_GPIO_DEVICE_BCM:
return digitalReadDeviceV2(pin);
case WPI_MODE_GPIO_DEVICE_WPI:
return digitalReadDeviceV2(pinToGpio[pin]);
case WPI_MODE_GPIO_DEVICE_PHYS:
return digitalReadDeviceV2(physToGpio[pin]);
case WPI_MODE_GPIO:
break;
}
if (ISRP1MODEL) {
switch(gpio[2*pin] & RP1_STATUS_LEVEL_MASK) {
default: // 11 or 00 not allowed, give LOW!
case RP1_STATUS_LEVEL_LOW: return LOW ;
case RP1_STATUS_LEVEL_HIGH: return HIGH ;
}
} else {
if ((*(gpio + gpioToGPLEV [pin]) & (1 << (pin & 31))) != 0)
return HIGH ;
else
return LOW ;
}
}
else
{
if ((node = wiringPiFindNode (pin)) == NULL)
return LOW ;
return node->digitalRead (node, pin) ;
}
}
/*
* digitalWrite:
* Set an output bit
*********************************************************************************
*/
void digitalWriteDeviceV2(int pin, int value) {
int ret;
struct gpio_v2_line_values values;
if (wiringPiDebug)
printf ("digitalWriteDeviceV2: ioctl pin:%d value: %d\n", pin, value) ;
if (lineFds[pin]<0) {
// line not requested - auto request on first write as output
pinModeDevice(pin, OUTPUT);
}
if (lineFds[pin]>=0 && (lineFlags[pin] & GPIO_V2_LINE_FLAG_OUTPUT)>0) {
values.mask = 0;
values.bits = 0;
gpiotools_set_bit(&values.mask, 0);
gpiotools_assign_bit(&values.bits, 0, !!value);
ret = ioctl(lineFds[pin], GPIO_V2_LINE_SET_VALUES_IOCTL, &values);
if (ret == -1) {
ReportDeviceError("digitalWriteDeviceV2", pin, "GPIO_V2_LINE_SET_VALUES_IOCTL", ret);
return; // error
}
} else {
fprintf(stderr, "digitalWriteDeviceV2: no output (%d)\n", lineFlags[pin]);
}
return; // error
}
void digitalWrite (int pin, int value)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
if ((pin & PI_GPIO_MASK) == 0) // On-Board Pin
{
switch(wiringPiMode) {
default: //WPI_MODE_GPIO_SYS
fprintf(stderr, "digitalWrite: invalid mode\n");
return;
case WPI_MODE_PINS:
pin = pinToGpio [pin];
break;
case WPI_MODE_PHYS:
pin = physToGpio [pin];
break;
case WPI_MODE_GPIO_DEVICE_BCM:
digitalWriteDeviceV2(pin, value);
return;
case WPI_MODE_GPIO_DEVICE_WPI:
digitalWriteDeviceV2(pinToGpio[pin], value);
return;
case WPI_MODE_GPIO_DEVICE_PHYS:
digitalWriteDeviceV2(physToGpio[pin], value);
return;
case WPI_MODE_GPIO:
break;
}
if (ISRP1MODEL) {
if (value == LOW) {
//printf("Set pin %d >>0x%08x<< to low\n", pin, 1<<pin);
rio[RP1_RIO_OUT + RP1_CLR_OFFSET] = 1<<pin;
} else {
//printf("Set pin %d >>0x%08x<< to high\n", pin, 1<<pin);
rio[RP1_RIO_OUT + RP1_SET_OFFSET] = 1<<pin;
}
} else {
if (value == LOW)
*(gpio + gpioToGPCLR [pin]) = 1 << (pin & 31) ;
else
*(gpio + gpioToGPSET [pin]) = 1 << (pin & 31) ;
}
}
else
{
if ((node = wiringPiFindNode (pin)) != NULL)
node->digitalWrite (node, pin, value) ;
}
}
void pwmWrite (int pin, int value)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
setupCheck ("pwmWrite") ;
if ((pin & PI_GPIO_MASK) == 0) // On-Board Pin
{
if (!ToBCMPin(&pin)) {
return;
}
/* would be possible on ms mode but not on bal, deactivated, use pwmc modify instead
if (piGpioBase == GPIO_PERI_BASE_2711) {
value = (OSC_FREQ_BCM2711*value)/OSC_FREQ_DEFAULT;
}
*/
usingGpioMemCheck ("pwmWrite") ;
int channel = gpioToPwmPort[pin];
int readback = 0x00;
if (piRP1Model()) {
if (channel>=0 && channel<=3) {
unsigned int addr = RP1_PWM0_CHAN_START+RP1_PWM0_CHAN_OFFSET*channel+RP1_PWM0_CHAN_DUTY;
pwm[addr] = value;
readback = pwm[addr];
} else {
fprintf(stderr, "pwmWrite: invalid channel at GPIO pin %d \n", pin);
}
} else {
*(pwm + channel) = value ;
readback = *(pwm + channel);
}
if (wiringPiDebug) {
printf ("PWM value(duty): %u. Current register: 0x%08X\n", value, readback);
}
}
else
{
if ((node = wiringPiFindNode (pin)) != NULL)
node->pwmWrite (node, pin, value) ;
}
}
/*
* analogRead:
* Read the analog value of a given Pin.
* There is no on-board Pi analog hardware,
* so this needs to go to a new node.
*********************************************************************************
*/
int analogRead (int pin)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
if ((node = wiringPiFindNode (pin)) == NULL)
return 0 ;
else
return node->analogRead (node, pin) ;
}
/*
* analogWrite:
* Write the analog value to the given Pin.
* There is no on-board Pi analog hardware,
* so this needs to go to a new node.
*********************************************************************************
*/
void analogWrite (int pin, int value)
{
struct wiringPiNodeStruct *node = wiringPiNodes ;
if ((node = wiringPiFindNode (pin)) == NULL)
return ;
node->analogWrite (node, pin, value) ;
}
/*
* pwmToneWrite:
* Pi Specific.
* Output the given frequency on the Pi's PWM pin
*********************************************************************************
*/
void pwmToneWrite (int pin, int freq)
{
setupCheck ("pwmToneWrite") ;
if (freq == 0)
pwmWrite (pin, 0) ; // Off
else
{
int range = 600000 / freq ;
pwmSetRange (range) ;
pwmWrite (pin, freq / 2) ;
}
}
/*
* digitalWriteByte:
* digitalReadByte:
* Pi Specific
* Write an 8-bit byte to the first 8 GPIO pins - try to do it as
* fast as possible.
* However it still needs 2 operations to set the bits, so any external
* hardware must not rely on seeing a change as there will be a change
* to set the outputs bits to zero, then another change to set the 1's
* Reading is just bit fiddling.
* These are wiringPi pin numbers 0..7, or BCM_GPIO pin numbers
* 17, 18, 22, 23, 24, 24, 4 on a Pi v1 rev 0-3
* 17, 18, 27, 23, 24, 24, 4 on a Pi v1 rev 3 onwards or B+, 2, 3, zero
*********************************************************************************
*/
void digitalWriteByte (const int value)
{
uint32_t pinSet = 0 ;
uint32_t pinClr = 0 ;
int mask = 1 ;
int pin ;
FailOnModel5("digitalWriteByte");
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
return ;
}
else
{
for (pin = 0 ; pin < 8 ; ++pin)
{
if ((value & mask) == 0)
pinClr |= (1 << pinToGpio [pin]) ;
else
pinSet |= (1 << pinToGpio [pin]) ;
mask <<= 1 ;
}
*(gpio + gpioToGPCLR [0]) = pinClr ;
*(gpio + gpioToGPSET [0]) = pinSet ;
}
}
unsigned int digitalReadByte (void)
{
int pin, x ;
uint32_t raw ;
uint32_t data = 0 ;
FailOnModel5("digitalReadByte");
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
return 0;
}
else
{
raw = *(gpio + gpioToGPLEV [0]) ; // First bank for these pins
for (pin = 0 ; pin < 8 ; ++pin)
{
x = pinToGpio [pin] ;
data = (data << 1) | (((raw & (1 << x)) == 0) ? 0 : 1) ;
}
}
return data ;
}
/*
* digitalWriteByte2:
* digitalReadByte2:
* Pi Specific
* Write an 8-bit byte to the second set of 8 GPIO pins. This is marginally
* faster than the first lot as these are consecutive BCM_GPIO pin numbers.
* However they overlap with the original read/write bytes.
*********************************************************************************
*/
void digitalWriteByte2 (const int value)
{
FailOnModel5("digitalWriteByte2");
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
}
else
{
*(gpio + gpioToGPCLR [0]) = (~value & 0xFF) << 20 ; // 0x0FF00000; ILJ > CHANGE: Old causes glitch
*(gpio + gpioToGPSET [0]) = ( value & 0xFF) << 20 ;
}
}
unsigned int digitalReadByte2 (void)
{
uint32_t data = 0 ;
FailOnModel5("digitalReadByte2");
if (wiringPiMode == WPI_MODE_GPIO_SYS)
{
}
else
data = ((*(gpio + gpioToGPLEV [0])) >> 20) & 0xFF ; // First bank for these pins
return data ;
}
/*
* waitForInterrupt2:
* Wait for Interrupt on a GPIO pin and use v2 of the character device API, need Kernel 5.1
* Returns struct WPIWfiStatus
*********************************************************************************
*/
struct WPIWfiStatus waitForInterrupt2(int pin, int edgeMode, int ms, unsigned long debounce_period_us) // ms < 0 wait infinite, = 0 return immediately, > 0 wait timeout
{
int ret;
int fd, attr, status, readret;
struct pollfd polls ;
struct gpio_v2_line_event evdata;
struct gpio_v2_line_config config;
struct gpio_v2_line_request req;
const char* strmode = "";
struct WPIWfiStatus wfiStatus;
memset(&wfiStatus, 0, sizeof(wfiStatus));
/* open gpio */
if (wiringPiGpioDeviceGetFd()<0 || !ToBCMPin(&pin)) {
wfiStatus.statusOK = -1;
return wfiStatus;
}
memset(&req, 0, sizeof(req));
memset(&config, 0, sizeof(config));
/* setup config */
config.flags = GPIO_V2_LINE_FLAG_INPUT;
switch(edgeMode) {
default:
case INT_EDGE_SETUP:
if (wiringPiDebug) {
printf ("waitForInterrupt2: edgeMode INT_EDGE_SETUP - exiting\n") ;
}
wfiStatus.statusOK = -1;
return wfiStatus;
case INT_EDGE_FALLING:
config.flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
strmode = "falling";
break;
case INT_EDGE_RISING:
config.flags |= GPIO_V2_LINE_FLAG_EDGE_RISING;
strmode = "rising";
break;
case INT_EDGE_BOTH:
config.flags |= (GPIO_V2_LINE_FLAG_EDGE_FALLING | GPIO_V2_LINE_FLAG_EDGE_RISING);
strmode = "both";
break;
}
strcpy(req.consumer, "wiringpi_gpio_irq");
if (debounce_period_us) {
attr = config.num_attrs;
config.num_attrs++;
gpiotools_set_bit(&config.attrs[attr].mask, 0);
config.attrs[attr].attr.id = GPIO_V2_LINE_ATTR_ID_DEBOUNCE;
config.attrs[attr].attr.debounce_period_us = debounce_period_us;
}
req.num_lines = 1;
req.offsets[0] = pin;
req.event_buffer_size = 32;
req.config = config;
status = ioctl(chipFd, GPIO_V2_GET_LINE_IOCTL, &req);
if (status == -1) {
ReportDeviceError("GPIO_V2_GET_LINE_IOCTL", pin , strmode, status);
wfiStatus.statusOK = -1;
return wfiStatus;
}
if (wiringPiDebug) {
printf ("waitForInterrupt2: GPIO get line %d , mode %s succeded, fd=%d\n", pin, strmode, req.fd) ;
}
fd = req.fd;
isrFds [pin] = fd;
isrDebouncePeriodUs[pin] = debounce_period_us;
/* set event fd nonbloack read */
/*
int flags = fcntl(fd, F_GETFL);
flags |= O_NONBLOCK;
status = fcntl(fd, F_SETFL, flags);
if (status) {
fprintf(stderr, "wiringPi: ERROR: fcntl set nonblock return=%d\n", status);
return -1;
}
*/
// Setup poll structure
polls.fd = fd;
polls.events = POLLIN | POLLPRI;
polls.revents = 0;
ret = poll(&polls, 1, ms);
if (ret < 0) {
if (wiringPiDebug) {
fprintf(stderr, "waitForInterrupt2: ERROR: poll returned=%d\n", ret);
}
wfiStatus.statusOK = -1;
} else if (ret == 0) {
if (wiringPiDebug) {
fprintf(stderr, "waitForInterrupt2: timeout: poll returned zero\n");
}
wfiStatus.statusOK = 0; // timeout
}
else {
if (wiringPiDebug) {
printf ("waitForInterrupt2: IRQ line %d received %d, fd=%d\n", pin, ret, isrFds[pin]);
}
if (polls.revents & POLLIN) {
/* read event data */
readret = read(isrFds [pin], &evdata, sizeof(evdata));
if (readret == sizeof(evdata)) {
if (wiringPiDebug) {
printf ("waitForInterrupt2: IRQ at PIN: %d, timestamp: %lld\n", evdata.offset, evdata.timestamp_ns) ;
}
switch (evdata.id) {
case GPIO_V2_LINE_EVENT_RISING_EDGE:
wfiStatus.edge = INT_EDGE_RISING;
if (wiringPiDebug) printf("waitForInterrupV2: rising edge\n");
break;
case GPIO_V2_LINE_EVENT_FALLING_EDGE:
wfiStatus.edge = INT_EDGE_FALLING;
if (wiringPiDebug) printf("waitForInterrupt2: falling edge\n");
break;
default:
wfiStatus.edge = INT_EDGE_SETUP; // edge = 0
if (wiringPiDebug) printf("waitForInterrupt2: unknown event\n");
break;
}
wfiStatus.timeStamp_us = evdata.timestamp_ns / 1000LL; // nanoseconds u64 to microseconds
wfiStatus.pinBCM = evdata.offset;
wfiStatus.statusOK = 1;
}
else {
wfiStatus.statusOK = -1;
}
}
else {
wfiStatus.statusOK = -1;
}
}
if (isrFds[pin] > 0) {
close(isrFds [pin]); // release line
isrFds [pin] = -1;
isrDebouncePeriodUs[pin] = 0;
}
return wfiStatus;
}
int waitForInterrupt (int pin, int ms) {
struct WPIWfiStatus status;
int edgeMode = isrEdgeMode[pin];
if (edgeMode==0) {
fprintf(stderr, "waitForInterrupt: ERROR: edge mode missing, legacy function, please use waitForInterrupt2!\n");
return -1;
}
status = waitForInterrupt2(pin, edgeMode, ms, 0);
return status.statusOK;
}
/*
* wiringPiISRStop:
* stop interruptHandler thread and
* wait untill stopped.
* close isrFds[pin], reset isrFds[pin], isrFunction[pin] and isrDebouncePeriodUs[pin]
*
*********************************************************************************
*/
int wiringPiISRStop(int pin) {
if (wiringPiMode == WPI_MODE_UNINITIALISED) {
return wiringPiFailure(WPI_FATAL, "wiringPiISRStop: wiringPi has not been initialised. Unable to continue.\n");
}
if (!ToBCMPin(&pin)) {
fprintf(stderr, "wiringPiISRStop: wrong pin %d (mode: %d) number!\n", pin, wiringPiMode);
return EINVAL;
}
if (wiringPiDebug) {
printf("wiringPiISRStop: pin %d\n", pin) ;
}
if (isrFds[pin] > 0) {
void *res;
if (wiringPiDebug)
printf("wiringPiISRStop: close thread 0x%lX\n", (unsigned long)isrThreads[pin]);
if (isrThreads[pin] != 0) {
if (pthread_cancel(isrThreads[pin]) == 0) {
pthread_join(isrThreads[pin], &res);
if (res == PTHREAD_CANCELED) {
if (wiringPiDebug)
printf("wiringPiISRStop: thread was canceled\n");
}
else {
if (wiringPiDebug)
printf("wiringPiISRStop: thread was not canceled\n");
}
} else {
if (wiringPiDebug)
printf("wiringPiISRStop: could not cancel thread\n");
}
}
close(isrFds [pin]);
} else {
if (wiringPiDebug)
printf("wiringPiISRStop: Warning stop isr, but its not active\n");
}
isrFds [pin] = -1;
isrFunctions[pin] = NULL;
isrFunctionsV2[pin] = NULL;
isrUserdata[pin] = NULL;;
isrDebouncePeriodUs[pin] = 0;
/* -not closing so far - other isr may be using it - only close if no other is using - will code later
if (chipFd>0) {
close(chipFd);
}
chipFd = -1;
*/
if (wiringPiDebug) {
printf("wiringPiISRStop: wiringPiISRStop finished\n");
}
return 0;
}
int waitForInterruptClose(int pin) {
return wiringPiISRStop(pin);
}
/*
* interruptHandlerV2:
* This is a thread and gets started to wait for the interrupt we're
* hoping to catch. It will call the user-function when the interrupt
* fires.
*********************************************************************************
*/
void *interruptHandlerV2(void *arg)
{
const char* strmode = "";
int pin, EdgeMode, ret, fd, attr, i;
unsigned int readret;
unsigned long debounce_period_us;
struct pollfd polls ;
struct gpio_v2_line_config config;
struct gpio_v2_line_request req;
struct gpio_v2_line_event evdat[64];
struct WPIWfiStatus wfiStatus;
struct timespec tspec = {0, 5e5}; /* 0.5 ms timeout {0, 1e6} */
pin = *(int *)arg;
if (wiringPiGpioDeviceGetFd()<0) {
return NULL;
}
EdgeMode = isrEdgeMode[pin];
debounce_period_us = isrDebouncePeriodUs[pin];
if (wiringPiDebug) {
printf ("interruptHandlerV2: GPIO line %d, edge mode %d, debounce_period_us %lu \n", pin, EdgeMode, debounce_period_us) ;
}
memset(&req, 0, sizeof(req));
memset(&config, 0, sizeof(config));
/* setup config */
config.flags = GPIO_V2_LINE_FLAG_INPUT;
switch(EdgeMode) {
default:
case INT_EDGE_SETUP:
if (wiringPiDebug) {
printf ("interruptHandlerV2: waitForInterruptMode edge mode INT_EDGE_SETUP - exiting\n") ;
}
return NULL;
case INT_EDGE_FALLING:
config.flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
strmode = "falling";
break;
case INT_EDGE_RISING:
config.flags |= GPIO_V2_LINE_FLAG_EDGE_RISING;
strmode = "rising";
break;
case INT_EDGE_BOTH:
config.flags |= (GPIO_V2_LINE_FLAG_EDGE_FALLING | GPIO_V2_LINE_FLAG_EDGE_RISING);
strmode = "both";
break;
}
strcpy(req.consumer, "wiringpi_gpio_irq");
if (debounce_period_us) {
attr = config.num_attrs;
config.num_attrs++;
gpiotools_set_bit(&config.attrs[attr].mask, 0);
config.attrs[attr].attr.id = GPIO_V2_LINE_ATTR_ID_DEBOUNCE;
config.attrs[attr].attr.debounce_period_us = debounce_period_us;
}
req.num_lines = 1;
req.event_buffer_size = 45;
req.offsets[0] = pin;
req.config = config;
ret = ioctl(chipFd, GPIO_V2_GET_LINE_IOCTL, &req);
if (ret == -1) {
ReportDeviceError("interruptHandlerV2: get line event", pin , strmode, ret);
return NULL;
}
if (wiringPiDebug)
printf ("interruptHandlerV2: GPIO get line %d , mode %s succeded, fd=%d\n", pin, strmode, req.fd) ;
/* set event fd */
fd = req.fd;
isrFds [pin] = fd;
(void)piHiPri (55) ; // Only effective if we run as root
for (;;) { // check if event data is available, check if interruptHandlerV2 thread must be canceled
// Setup poll structure
polls.fd = fd;
polls.events = POLLIN | POLLPRI;
polls.revents = 0;
// get event data, this is also a cancelation point, when pthread_cancel is called
ret = ppoll(&polls, 1, &tspec, NULL); // returns -1 on error, 0 on timeout, >0 number of elements
if (ret < 0) { // we do not reach this point if canceled, ppoll does not return, is Cancellation Point
if (wiringPiDebug)
printf("interruptHandlerV2: ERROR: poll returned=%d\n", ret);
pthread_exit(NULL);
return NULL; // never landing here
} else if (ret == 0) {
// if (wiringPiDebug)
// printf("interruptHandlerV2: timeout: poll returned=%d\n", ret);
continue;
}
else {
if (wiringPiDebug)
printf ("interruptHandlerV2: IRQ line %d received %d events, fd=%d\n", pin, ret, isrFds[pin]) ;
if (polls.revents & POLLIN) {
/* read event data */
readret = read(fd, &evdat, sizeof(evdat));
if (readret >= sizeof(evdat[0])) {
if (wiringPiDebug)
printf ("interruptHandlerV2: IRQ at PIN: %d, events: %u\n", evdat[0].offset, readret/(unsigned int)sizeof(evdat[0])) ;
ret = readret/sizeof(evdat[0]); // number of events read from fd
for (i = 0; i < ret; ++i) {
if (isrFunctionsV2[pin]) {
if (wiringPiDebug)
printf( "interruptHandlerV2: GPIO EVENT at %llu on line %u (%u|%u) \n", evdat[i].timestamp_ns, evdat[i].offset, evdat[i].line_seqno, evdat[i].seqno);
wfiStatus.statusOK = 1;
wfiStatus.pinBCM = pin;
switch (evdat[i].id) {
case GPIO_V2_LINE_EVENT_RISING_EDGE:
wfiStatus.edge = INT_EDGE_RISING;
if (wiringPiDebug)
printf("waitForInterrupt2: rising edge\n");
break;
case GPIO_V2_LINE_EVENT_FALLING_EDGE:
wfiStatus.edge = INT_EDGE_FALLING;
if (wiringPiDebug)
printf("waitForInterrupt2: falling edge\n");
break;
default:
wfiStatus.edge = INT_EDGE_SETUP; // edge = 0
if (wiringPiDebug)
printf("waitForInterrupt2: unknown event\n");
break;
}
wfiStatus.timeStamp_us = evdat[i].timestamp_ns/1000LL;
if (wiringPiDebug) {
printf( "interruptHandlerV2: call isr function\n");
}
isrFunctionsV2[pin](wfiStatus, isrUserdata[pin]);
if (wiringPiDebug) {
printf( "interruptHandlerV2: return from isr function\n");
}
}
if (isrFunctions[pin]) {
if (wiringPiDebug) {
printf( "interruptHandlerV2: call isr function classic\n");
}
isrFunctions[pin]();
if (wiringPiDebug) {
printf( "interruptHandlerV2: return from isr function classic\n");
}
}
}
}
else { // if thread canceled we do not reach this point, read(...) does not return, is Cancellation Point
if (wiringPiDebug)
printf ("interruptHandlerV2: reading events from fd received signal, exit thread\n");
pthread_exit(NULL);
return NULL; // never landing here
}
}
}
}
}
/*
* wiringPiISR:
* Pi Specific.
* Take the details and create an interrupt handler that will do a call-
* back to the user supplied function.
* debounce_period_us in microseconds
*********************************************************************************
*/
int wiringPiISRInternal(int pin, int edgeMode, void (*function)(struct WPIWfiStatus wfiStatus, void* userdata), void (*functionClassic)(void), unsigned long debounce_period_us, void* userdata)
{
if (wiringPiMode == WPI_MODE_UNINITIALISED) {
return wiringPiFailure(WPI_FATAL, "wiringPiISR: wiringPi has not been initialised. Unable to continue.\n");
}
if (!ToBCMPin(&pin)) {
fprintf(stderr, "wiringPiISRStop: wrong pin %d (mode: %d) number!\n", pin, wiringPiMode);
return EINVAL;
}
if (wiringPiDebug) {
printf("wiringPi: wiringPiISR pin %d, edgeMode %d\n", pin, edgeMode);
}
if (isrFunctions[pin] || isrFunctionsV2[pin]) {
fprintf(stderr, "wiringPi: ISR function already active, ignoring \n");
}
isrFunctionsV2[pin] = function;
isrUserdata[pin] = userdata;
isrFunctions[pin] = functionClassic;
isrEdgeMode[pin] = edgeMode;
isrDebouncePeriodUs[pin] = debounce_period_us;
if (wiringPiDebug) {
printf("wiringPi: mutex in\n");
}
pthread_mutex_lock (&pinMutex) ;
pinPass = pin ;
if (wiringPiDebug) {
printf("wiringPi: pthread_create before 0x%lX\n", (unsigned long)isrThreads[pin]);
}
if (pthread_create (&isrThreads[pin], NULL, interruptHandlerV2, &pin)==0) {
if (wiringPiDebug) {
printf("wiringPi: pthread_create successed, 0x%lX\n", (unsigned long)isrThreads[pin]);
}
/* while (pinPass != -1)
delay (1) ; */
// wait so that interruptHandler is up und running.
// when interruptHandler is running, the calling function wiringPiISR
// must be still alive, otherwise the thread argument &pin points into nirwana,
// when it is picked up from interruptHandler.
delay (10);
} else {
if (wiringPiDebug) {
printf("wiringPi: pthread_create failed\n");
}
}
if (wiringPiDebug) {
printf("wiringPi: mutex out\n");
}
pthread_mutex_unlock (&pinMutex) ;
if (wiringPiDebug) {
printf("wiringPi: wiringPiISR finished\n");
}
return 0 ;
}
int wiringPiISR (int pin, int mode, void (*function)(void))
{
return wiringPiISRInternal(pin, mode, NULL, function, 0, NULL);
}
int wiringPiISR2(int pin, int edgeMode, void (*function)(struct WPIWfiStatus wfiStatus, void* userdata), unsigned long debounce_period_us, void* userdata)
{
return wiringPiISRInternal(pin, edgeMode, function, NULL, debounce_period_us, userdata);
}
/*
* initialiseEpoch:
* Initialise our start-of-time variable to be the current unix
* time in milliseconds and microseconds.
*********************************************************************************
*/
static void initialiseEpoch (void)
{
#ifdef OLD_WAY
struct timeval tv ;
gettimeofday (&tv, NULL) ;
epochMilli = (uint64_t)tv.tv_sec * (uint64_t)1000 + (uint64_t)(tv.tv_usec / 1000) ;
epochMicro = (uint64_t)tv.tv_sec * (uint64_t)1000000 + (uint64_t)(tv.tv_usec) ;
#else
struct timespec ts ;
clock_gettime (CLOCK_MONOTONIC_RAW, &ts) ;
epochMilli = (uint64_t)ts.tv_sec * (uint64_t)1000 + (uint64_t)(ts.tv_nsec / 1000000L) ;
epochMicro = (uint64_t)ts.tv_sec * (uint64_t)1000000 + (uint64_t)(ts.tv_nsec / 1000L) ;
#endif
}
/*
* delay:
* Wait for some number of milliseconds
*********************************************************************************
*/
void delay (unsigned int ms)
{
struct timespec sleeper, dummy ;
sleeper.tv_sec = (time_t)(ms / 1000) ;
sleeper.tv_nsec = (long)(ms % 1000) * 1000000 ;
nanosleep (&sleeper, &dummy) ;
}
/*
* delayMicroseconds:
* This is somewhat intersting. It seems that on the Pi, a single call
* to nanosleep takes some 80 to 130 microseconds anyway, so while
* obeying the standards (may take longer), it's not always what we
* want!
*
* So what I'll do now is if the delay is less than 100uS we'll do it
* in a hard loop, watching a built-in counter on the ARM chip. This is
* somewhat sub-optimal in that it uses 100% CPU, something not an issue
* in a microcontroller, but under a multi-tasking, multi-user OS, it's
* wastefull, however we've no real choice )-:
*
* Plan B: It seems all might not be well with that plan, so changing it
* to use gettimeofday () and poll on that instead...
*********************************************************************************
*/
void delayMicrosecondsHard (unsigned int us)
{
struct timeval tNow, tLong, tEnd ;
gettimeofday (&tNow, NULL) ;
tLong.tv_sec = us / 1000000 ;
tLong.tv_usec = us % 1000000 ;
timeradd (&tNow, &tLong, &tEnd) ;
while (timercmp (&tNow, &tEnd, <))
gettimeofday (&tNow, NULL) ;
}
void delayMicroseconds (unsigned int us)
{
struct timespec sleeper ;
unsigned int uSecs = us % 1000000 ;
unsigned int wSecs = us / 1000000 ;
if (us == 0)
return ;
else if (us < 100)
delayMicrosecondsHard (us) ;
else
{
sleeper.tv_sec = wSecs ;
sleeper.tv_nsec = (long)(uSecs * 1000L) ;
nanosleep (&sleeper, NULL) ;
}
}
/*
* millis:
* Return a number of milliseconds as an unsigned int.
* Wraps at 49 days.
*********************************************************************************
*/
unsigned int millis (void)
{
uint64_t now ;
#ifdef OLD_WAY
struct timeval tv ;
gettimeofday (&tv, NULL) ;
now = (uint64_t)tv.tv_sec * (uint64_t)1000 + (uint64_t)(tv.tv_usec / 1000) ;
#else
struct timespec ts ;
clock_gettime (CLOCK_MONOTONIC_RAW, &ts) ;
now = (uint64_t)ts.tv_sec * (uint64_t)1000 + (uint64_t)(ts.tv_nsec / 1000000L) ;
#endif
return (uint32_t)(now - epochMilli) ;
}
/*
* micros:
* Return a number of microseconds as an unsigned int.
* Wraps after 71 minutes.
*********************************************************************************
*/
unsigned int micros (void)
{
uint64_t now ;
#ifdef OLD_WAY
struct timeval tv ;
gettimeofday (&tv, NULL) ;
now = (uint64_t)tv.tv_sec * (uint64_t)1000000 + (uint64_t)tv.tv_usec ;
#else
struct timespec ts ;
clock_gettime (CLOCK_MONOTONIC_RAW, &ts) ;
now = (uint64_t)ts.tv_sec * (uint64_t)1000000 + (uint64_t)(ts.tv_nsec / 1000) ;
#endif
return (uint32_t)(now - epochMicro) ;
}
unsigned long long piMicros64(void) {
struct timespec ts;
clock_gettime (CLOCK_MONOTONIC_RAW, &ts) ;
uint64_t now = (uint64_t)ts.tv_sec * (uint64_t)1000000 + (uint64_t)(ts.tv_nsec / 1000) ;
return (now - epochMicro) ;
}
/*
* wiringPiVersion:
* Return our current version number
*********************************************************************************
*/
void wiringPiVersion (int *major, int *minor)
{
*major = VERSION_MAJOR ;
*minor = VERSION_MINOR ;
}
int wiringPiUserLevelAccess(void)
{
struct stat statBuf ;
const char* gpiomemModule = gpiomem_BCM;
piBoard();
if (piRP1Model()) {
gpiomemModule = gpiomem_RP1;
}
return stat(gpiomemModule, &statBuf) == 0 ? 1 : 0;
}
int CheckPCIeFileContent(const char* pcieaddress, const char* filename, const char* content) {
char file_path[512];
int Found = 0;
snprintf(file_path, sizeof(file_path), "%s/%s/%s", pcie_path, pcieaddress, filename);
if (wiringPiDebug) { printf("Open: %s ->", file_path); }
FILE *device_file = fopen(file_path, "r");
if (device_file != NULL) {
char buffer[64];
if (fgets(buffer, sizeof(buffer), device_file) != NULL) {
if (wiringPiDebug) { printf(" %s", buffer); }
if (strstr(buffer, content) != NULL) {
Found = 1;
if (wiringPiDebug) { printf(" >> correct\n"); }
} else {
if (wiringPiDebug) { printf(" >> wrong\n"); }
}
}
fclose(device_file);
} else {
if (wiringPiDebug) { perror("fopen"); };
}
return Found;
}
void GetRP1Memory(void) {
pciemem_RP1[0] = '\0';
DIR *dir = opendir(pcie_path);
struct dirent *entry;
if (dir == NULL) {
if (wiringPiDebug) { perror("opendir"); };
return;
}
while ((entry = readdir(dir)) != NULL) {
if (entry->d_type == DT_LNK) {
if (CheckPCIeFileContent(entry->d_name, "device", pciemem_RP1_Device) &&
CheckPCIeFileContent(entry->d_name, "vendor", pciemem_RP1_Ventor)) {
snprintf(pciemem_RP1, sizeof(pciemem_RP1), "%s/%s/%s", pcie_path, entry->d_name, pciemem_RP1_bar);
if (wiringPiDebug) { printf("RP1 device memory found at '%s'\n", pciemem_RP1); }
break;
}
}
}
closedir(dir);
}
int wiringPiGlobalMemoryAccess(void)
{
const char* gpiomemGlobal;
int fd=-1;
unsigned int MMAP_size;
unsigned int BaseAddr, PWMAddr;
piBoard();
if (piRP1Model()) {
GetRP1Memory();
gpiomemGlobal = pciemem_RP1;
MMAP_size = pciemem_RP1_Size;
BaseAddr = 0x00000000;
PWMAddr = 0x00000000; //not supported so far
} else {
gpiomemGlobal = gpiomem_global;
MMAP_size = BLOCK_SIZE;
BaseAddr = piGpioBase + 0x00200000 ;
PWMAddr = piGpioBase + 0x0020C000 ;
}
if ((fd = open (gpiomemGlobal, O_RDWR | O_SYNC | O_CLOEXEC)) >0) {
int returnvalue = 1; // OK
uint32_t * lgpio = (uint32_t *)mmap(0, MMAP_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, BaseAddr) ;
if (lgpio == MAP_FAILED) {
returnvalue = 0;
if (wiringPiDebug)
fprintf(stderr,"wiringPiGlobalMemoryAccess: mmap (GPIO 0x%X,0x%X) failed: %s\n", BaseAddr, MMAP_size, strerror (errno)) ;
} else {
munmap(lgpio, MMAP_size);
if (piRP1Model()) {
returnvalue = 2; // GPIO & PWM accessible (same area, nothing to mmap)
} else {
//check PWM area
uint32_t* lpwm = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, PWMAddr) ;
if (lpwm == MAP_FAILED) {
returnvalue = 1; // only GPIO accessible
if (wiringPiDebug)
fprintf(stderr,"wiringPiGlobalMemoryAccess: mmap (PWM 0x%X,0x%X) failed: %s\n", PWMAddr, MMAP_size, strerror (errno)) ;
} else {
returnvalue = 2; // GPIO & PWM accessible
munmap(lpwm, BLOCK_SIZE);
}
}
}
close(fd);
return returnvalue;
}
return 0; // Failed!
}
/*
* wiringPiSetup:
* Must be called once at the start of your program execution.
*
* Default setup: Initialises the system into wiringPi Pin mode and uses the
* memory mapped hardware directly.
*
* Changed now to revert to "gpio" mode if we're running on a Compute Module.
*********************************************************************************
*/
int wiringPiSetup (void)
{
int fd ;
int model, rev, mem, maker, overVolted ;
if (wiringPiSetuped)
return 0 ;
wiringPiSetuped = TRUE ;
if (getenv (ENV_DEBUG) != NULL)
wiringPiDebug = TRUE ;
if (getenv (ENV_CODES) != NULL)
wiringPiReturnCodes = TRUE ;
if (wiringPiDebug)
printf ("wiringPi: wiringPiSetup called\n") ;
// Get the board ID information. We're not really using the information here,
// but it will give us information like the GPIO layout scheme (2 variants
// on the older 26-pin Pi's) and the GPIO peripheral base address.
// and if we're running on a compute module, then wiringPi pin numbers
// don't really mean anything, so force native BCM mode anyway.
piBoardId (&model, &rev, &mem, &maker, &overVolted) ;
if ((model == PI_MODEL_CM) ||
(model == PI_MODEL_CM3) ||
(model == PI_MODEL_CM3P))
wiringPiMode = WPI_MODE_GPIO ;
else
wiringPiMode = WPI_MODE_PINS ;
if (piGpioLayout () == GPIO_LAYOUT_PI1_REV1) // A, B, Rev 1, 1.1
{
pinToGpio = pinToGpioR1 ;
physToGpio = physToGpioR1 ;
}
else // A2, B2, A+, B+, CM, Pi2, Pi3, Zero, Zero W, Zero 2 W
{
pinToGpio = pinToGpioR2 ;
physToGpio = physToGpioR2 ;
}
// Open the master /dev/ memory control device
// Device strategy: December 2016:
// Try /dev/mem. If that fails, then
// try /dev/gpiomem. If that fails then game over.
const char* gpiomemGlobal = gpiomem_global;
const char* gpiomemModule = gpiomem_BCM;
if (piRP1Model()) {
GetRP1Memory();
gpiomemGlobal = pciemem_RP1;
gpiomemModule = gpiomem_RP1;
// PWM alt pins @RP1 - need to be translated to RP1_FSEL with pinModeAlt
gpioToPwmALT[12] = FSEL_ALT0;
gpioToPwmALT[13] = FSEL_ALT0;
gpioToPwmALT[18] = FSEL_ALT3;
gpioToPwmALT[19] = FSEL_ALT3;
//PWM0 channel @RP1
gpioToPwmPort[12] = 0;
gpioToPwmPort[13] = 1;
gpioToPwmPort[18] = 2;
gpioToPwmPort[19] = 3;
}
usingGpioMem = FALSE;
if (gpiomemGlobal==NULL || (fd = open (gpiomemGlobal, O_RDWR | O_SYNC | O_CLOEXEC)) < 0)
{
if (wiringPiDebug) {
printf ("wiringPi: no access to %s try %s\n", gpiomemGlobal, gpiomemModule) ;
}
if (gpiomemModule && (fd = open (gpiomemModule, O_RDWR | O_SYNC | O_CLOEXEC) ) >= 0) // We're using gpiomem
{
piGpioBase = 0 ;
usingGpioMem = TRUE ;
}
else
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: Unable to open %s or %s: %s.\n"
" Aborting your program because if it can not access the GPIO\n"
" hardware then it most certianly won't work\n"
" Try running with sudo?\n", gpiomemGlobal, gpiomemModule, strerror (errno)) ;
}
if (wiringPiDebug) {
printf ("wiringPi: access to %s succeded %d\n", usingGpioMem ? gpiomemModule : gpiomemGlobal, fd) ;
}
// GPIO:
if (!piRP1Model()) {
//Set the offsets into the memory interface.
GPIO_PADS = piGpioBase + 0x00100000 ;
GPIO_CLOCK_ADR = piGpioBase + 0x00101000 ;
GPIO_BASE = piGpioBase + 0x00200000 ;
GPIO_TIMER = piGpioBase + 0x0000B000 ;
GPIO_PWM = piGpioBase + 0x0020C000 ;
GPIO_RIO = 0x00 ;
// Map the individual hardware components
// GPIO:
base = NULL;
gpio = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_BASE) ;
if (gpio == MAP_FAILED)
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap (GPIO) failed: %s\n", strerror (errno)) ;
// PWM
pwm = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_PWM) ;
if (pwm == MAP_FAILED)
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap (PWM) failed: %s\n", strerror (errno)) ;
// Clock control (needed for PWM)
clk = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_CLOCK_ADR) ;
if (clk == MAP_FAILED)
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap (CLOCK) failed: %s\n", strerror (errno)) ;
// The drive pads
pads = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_PADS) ;
if (pads == MAP_FAILED)
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap (PADS) failed: %s\n", strerror (errno)) ;
// The system timer
timer = (uint32_t *)mmap(0, BLOCK_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED, fd, GPIO_TIMER) ;
if (timer == MAP_FAILED)
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap (TIMER) failed: %s\n", strerror (errno)) ;
// Set the timer to free-running, 1MHz.
// 0xF9 is 249, the timer divide is base clock / (divide+1)
// so base clock is 250MHz / 250 = 1MHz.
*(timer + TIMER_CONTROL) = 0x0000280 ;
*(timer + TIMER_PRE_DIV) = 0x00000F9 ;
timerIrqRaw = timer + TIMER_IRQ_RAW ;
// Export the base addresses for any external software that might need them
_wiringPiBase = base ;
_wiringPiGpio = gpio ;
_wiringPiPwm = pwm ;
_wiringPiClk = clk ;
_wiringPiPads = pads ;
_wiringPiTimer = timer ;
_wiringPiRio = NULL ;
} else {
unsigned int MMAP_size = (usingGpioMem) ? gpiomem_RP1_Size : pciemem_RP1_Size;
GPIO_PADS = (RP1_PADS0_Addr-RP1_IO0_Addr) ;
GPIO_CLOCK_ADR = (RP1_CLOCK_Addr-RP1_BASE_Addr);
GPIO_BASE = (RP1_IO0_Addr-RP1_BASE_Addr) ;
GPIO_TIMER = 0x00;
GPIO_PWM = RP1_PWM0_Addr-RP1_BASE_Addr;
GPIO_RIO = (RP1_SYS_RIO0_Addr-RP1_IO0_Addr) ;
//map hole RP1 memory block from beginning,
base = (unsigned int *)mmap(0, MMAP_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0x00000000) ;
if (base == MAP_FAILED)
return wiringPiFailure (WPI_ALMOST, "wiringPiSetup: mmap failed: %s\n", strerror (errno)) ;
if (usingGpioMem) {
gpio = base; // RP1 start adress of map memory for gpio (same as module memory)
pwm = NULL; // outside of mapped memory, PWM not available from none root
clk = NULL; // outside of mapped memory, CLK main not available from none root
} else {
gpio = &base[GPIO_BASE/4]; // RP1 start adress of map memory for gpio
pwm = &base[GPIO_PWM/4]; // RP1 start adress of map memory for pwm0
clk = &base[GPIO_CLOCK_ADR/4]; // RP1 start adress of map memory for clocks_main
}
pads = &gpio[GPIO_PADS/4]; // RP1 start adress of map memory for pads
rio = &gpio[GPIO_RIO/4]; // RP1 start adress of map memory for rio
GPIO_PADS += GPIO_BASE;
GPIO_RIO += GPIO_BASE;
// Export the base addresses for any external software that might need them
_wiringPiBase = base ;
_wiringPiGpio = gpio ;
_wiringPiPwm = pwm ;
_wiringPiClk = clk ;
_wiringPiPads = pads ;
_wiringPiTimer = NULL ;
_wiringPiRio = rio ;
}
if (wiringPiDebug) {
printf ("wiringPi: memory map gpio 0x%x %s\n", GPIO_BASE , _wiringPiGpio ? "valid" : "invalid");
printf ("wiringPi: memory map pads 0x%x %s\n", GPIO_PADS , _wiringPiPads ? "valid" : "invalid");
printf ("wiringPi: memory map rio 0x%x %s\n", GPIO_RIO , _wiringPiRio ? "valid" : "invalid");
printf ("wiringPi: memory map pwm0 0x%x %s\n", GPIO_PWM , _wiringPiPwm ? "valid" : "invalid");
printf ("wiringPi: memory map clocks 0x%x %s\n", GPIO_CLOCK_ADR, _wiringPiClk ? "valid" : "invalid");
printf ("wiringPi: memory map timer 0x%x %s\n", GPIO_TIMER ,_wiringPiTimer ? "valid" : "invalid");
}
initialiseEpoch () ;
return 0 ;
}
/*
* wiringPiSetupGpio:
* Must be called once at the start of your program execution.
*
* GPIO setup: Initialises the system into GPIO Pin mode and uses the
* memory mapped hardware directly.
*********************************************************************************
*/
int wiringPiSetupGpio (void)
{
(void)wiringPiSetup () ;
if (wiringPiDebug)
printf ("wiringPi: wiringPiSetupGpio called\n") ;
wiringPiMode = WPI_MODE_GPIO ;
return 0 ;
}
/*
* wiringPiSetupPhys:
* Must be called once at the start of your program execution.
*
* Phys setup: Initialises the system into Physical Pin mode and uses the
* memory mapped hardware directly.
*********************************************************************************
*/
int wiringPiSetupPhys (void)
{
(void)wiringPiSetup () ;
if (wiringPiDebug)
printf ("wiringPi: wiringPiSetupPhys called\n") ;
wiringPiMode = WPI_MODE_PHYS ;
return 0 ;
}
int wiringPiSetupPinType (enum WPIPinType pinType) {
if (wiringPiDebug)
printf ("wiringPi: wiringPiSetupPinType(%d) called\n", (int) pinType) ;
switch (pinType) {
case WPI_PIN_BCM: return wiringPiSetupGpio();
case WPI_PIN_WPI: return wiringPiSetup();
case WPI_PIN_PHYS: return wiringPiSetupPhys();
default: return -1;
}
}
int wiringPiSetupGpioDevice (enum WPIPinType pinType) {
if (wiringPiSetuped)
return 0 ;
if (wiringPiDebug) {
printf ("wiringPi: wiringPiSetupGpioDevice(%d) called\n", (int)pinType) ;
}
if (getenv (ENV_DEBUG) != NULL)
wiringPiDebug = TRUE ;
if (getenv (ENV_CODES) != NULL)
wiringPiReturnCodes = TRUE ;
if (wiringPiGpioDeviceGetFd()<0) {
return -1;
}
wiringPiSetuped = TRUE ;
if (piGpioLayout () == GPIO_LAYOUT_PI1_REV1){
pinToGpio = pinToGpioR1 ;
physToGpio = physToGpioR1 ;
} else {
pinToGpio = pinToGpioR2 ;
physToGpio = physToGpioR2 ;
}
initialiseEpoch () ;
switch (pinType) {
case WPI_PIN_BCM:
wiringPiMode = WPI_MODE_GPIO_DEVICE_BCM;
break;
case WPI_PIN_WPI:
wiringPiMode = WPI_MODE_GPIO_DEVICE_WPI;
break;
case WPI_PIN_PHYS:
wiringPiMode = WPI_MODE_GPIO_DEVICE_PHYS;
break;
default:
wiringPiSetuped = FALSE;
return -1;
}
return 0 ;
}
/*
* wiringPiSetupSys:
* GPIO Sysfs Interface for Userspace is deprecated
* https://www.kernel.org/doc/html/v5.5/admin-guide/gpio/sysfs.html
*
* Switched to new GPIO driver Interface in version 3.3
*/
int wiringPiSetupSys (void)
{
if (wiringPiSetuped)
return 0 ;
if (wiringPiDebug)
printf ("wiringPi: wiringPiSetupSys called\n") ;
return wiringPiSetupGpioDevice(WPI_PIN_BCM);
}
Reference in New Issue View Git Blame Copy Permalink